Web Orders Over $100 Ship Free. Enter Promo Code "SHIPFREE" for free UPS Ground Shipping at Checkout. (USA Only)

Force Sensors

Our Series 3i and 5i are a unique product designed for working in conjunction with a series of interchangeable remote force and torque sensors. The sensors do not require calibration or setup - the Series 3i and 5i gauges automatically recognize the sensor and displays the appropriate capacity and unit of measure. Simply plug and play!
NEW! 500 Hz max data output rate
Professional Digital Force Gauge with USB Ouput & Software
14,000 Hz sampling rate
Continuous/single data point capture for 5,000 readings, with statistics
Footswitch command string
Break detection and auto output/zero
NEW! 500 Hz max data output rate
Advanced Digital Force Gauge with USB Ouput & Software
7,000 Hz sampling rate
±0.1% accuracy
1,000 point data memory and statistics
USB, RS-232, Mitutoyo, and analog outputs
Remote Sensor Force / Torque Display
2,000 Hz sampling rate
±0.2% accuracy
USB output
Rugged "S-beam" force sensor
8 Ranges up to 10,000 lbs
Measures tensile and compressive forces
Compression Force Sensor
7 Ranges up to 10,000 lbs
Tension and Compression Force Sensor
8 Ranges up to 100 lbs
Well suited for inline tests
Miniature S-Beam Force Sensor
8 Ranges up to 100 lbs
Measures push and pull force
500 lbs capacity
Hand-Operated Wire Pull Tester
200 lbF / 1000 N capacity
Accommodates a wide range of wire diameters, up to 0.25 in. (6.4 mm) / 20 - 3 AWG.
Universal Torque Sensor
Capacities available from 10 ozin to 100 lbin
General torque testing
Interchangeable attachments
Capacities from 10 ozFin to 100 lbFin (7 to 1150 Ncm)
Bi-directional
Torque tool testing
Mounting holes for bench mounting
Capacities from 10 ozFin to 100 lbFin (7 to 1150 Ncm)
Closure, bottle cap testing
Capacities from 10 ozFin to 100 lbFin (7 to 1150 Ncm)
Torque wrench testing
Capacities from 20 lbin to 5,000 lbin (220 Ncm to 550 Nm)
Square Drive Torque Sensor
Capacities from 20 lbin to 5,000 lbin (220 Ncm to 550 Nm)
Force Sensors for use with Series F Test Frames
Capacities up to 500 lb / 2.5 kN
S-Beam Force Sensors for use with Series F Test Frames
Capacities up to 500 lb / 2.5 kN
Wireless Compression Load Cell
Wireless range of 700 meter/2300 ft.
Housing protection of Nema6/IP67
Optional Center of Gravity Software
Capacities up to 500 te (1,110,000 Lbs)
Tabletop Stand For Indicators & TT03
The FI-521 is a bi-directional load cell instrument accepting both positive and negative load cell signals, internally performing the analog to digital conversion at 80 times per second.
Table Top Stand for Display Units
Force Gauge without Display - DISCONTINUED
RS232 and Analog Output for system integration
7 Models up to 200lb capacity