The new MX-110 test stand offers consistent and reliable testing. The combination of a screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.
Connect the MX-110 test stand with a Z Series force gauge and enable force controlled testing. Force control can automatically stop testing when the force value reaches the high setpoint programmed on the Z Series force gauge, or maintain the force between the Z Series High and Low setpoints. Force control is ideal for fatigue or non-destructive testing.
The MX-110 accepts any of the standard range force gauges. Quick switch and Emergency Stop features are also included.
*FORCE GAUGE NOT INCLUDED
Designed to work with the Z2 & ZP force gauges.
- One stand for both compression (push) and tension (pull) tests
- Force Controlled operation with ZTA force gauges
-
4 speed ranges:
0.4 – 11.5 in/min
0.08 ~ 2.3 in/min ("-O")
0.8 - 23.0 in/min ("-F")
1.6 - 47.0 in/min ("-WF") - Jog, Single Cycle, Continuous Cycle, Force Control
- Maximum clearance 9" (with extender 14")
| Model | Speed Range | Distance Meter |
| MX-110 | 0.4 – 11.5
in/min (10 - 292 mm/min) |
No |
| MX-110-F | 0.8 - 23.0
in/min (18 - 584 mm/min) |
No |
| MX-110-WF | 1.5 - 47.0
in/min (38 - 1194 mm/min) |
No |
| MX-110S |
0.4 – 11.5 in/min (10 - 292 mm/min) |
Yes |
| MX-110S-MS |
0.7 - 23.0 in/min (18 - 584 mm/min) |
Yes |
| MX-110S-HS |
1.5 - 47.0 in/min (38 - 1194 mm/min) |
Yes |
| Item | Description | Price | ||
|---|---|---|---|---|
MX-110S-HS | MX-110S-HS Motorized Test Stand w/Distance Meter | $4,788.00 | ||
| Accessories | ||||
CB-501 | Force Control Cable | $102.00 | ||
CB-504 | Combination Force Control / Dataouput Cable | $198.00 | ||
Lexan Safety Shield | $354.00 | |||
AP005 | 5 inch extension plate | $96.00 | ||
