The Checkline hand-held electronic tension sensor for measuring tensions of textile ribbons, films, foils, fibre bunches etc.
10 Tension ranges available from 5.0 - 500 cN up to 0.5 - 50 daN
Electronic tension meter for applications in textile and wire industry.
Versatile applicable hand-held unit.
10 Tension ranges available from 5.0 - 500 cN up to 0.5 - 50 daN
Electronic tension meter for applications in textile and wire industry.
Versatile applicable hand-held unit.
- NIST-Traceable Calibration Certification in optionally available
- Dual-flanged outer guide rollers with various widths, from 7 mm to 30 mm (single-flanged rollers optional)
- For certain tension ranges and materials, it is possible to supply roller widths of 41 mm. Inquire.
- Memory for 60,000 data points with USB output with sample rates up to 1kHz
- Includes Tension Inspect Software at no additional charge; displays real-time readings on a PC or download stored data
- Optional Wi-Fi for wireless communication to a PC
- Large, backlight LCD-display with 3 different displays: numeric, numeric with live load bar, numeric with graph (time-tension)
- Display automatically rotates in 90° steps (or can be locked in any desired position)
- Built-in Diameter Compensator System is used to adjust calibration curve for highest accuracy. Diameter is set with wheel and shown on display
- Automatic "Zero-Setting" in all measuring positions using built-in gravity sensor
- 9 Separate Calibration Material memory locations for custom calibrations (can be performed by end-user and saved with alpha-numeric name)
- Storage of Min, Max and Last reading as well as Hi-Peak, Low-Peak, average and standard deviation
- High speed internal data sampling (8 kHz) for capture of accurate Min & Max Peaks
- Selectable units of measurement: Grams, cN, Kg, daN, Lbs and Newtons (N)
- Setup parameters can be password protected if desired so they are not accidentally changed by the user
- User-set Min and Max alarms with indication on LCD if reading is out of limits
- User-adjustable DAMPING is used to minimize tension fluctuations
- Re-chargeable Lithium Polymer battery lasts 40 hours (continuous use, approx)
- Rugged aluminium housing with rubberized handle provides a secure and comfortable grip
- Warranty: 1-Year
- Made in Germany
| Model | Tension Range* | Resolution | Measuring Head Width** | Roller Widths (mm) |
|---|---|---|---|---|
| DTXB-500 | 5.0 - 500 grams or cN | 0.1 g or cN | 55 mm | 7, 10, 15, 20 mm |
| DTXB-1000 | 50 - 1000 grams or cN | 1 g or cN | 55 mm | 7, 10, 15, 20, 30, 41 mm |
| DTXB-2000 | 100 - 2000 grams or cN | 1 g or cN | 55 mm | 7, 10, 15, 20, 30, 41 mm |
| DTXB-2500 | 150 - 2500 grams or cN | 1 g or cN | 117 mm | 7, 10, 15, 20, 30, 41 mm |
| DTXB-4000 | 200 - 4000 grams or cN | 1 g or cN | 55 mm | 7, 10, 15, 20, 30, 41 mm |
| DTXB-5000 | 250 - 5000 grams or cN | 1 g or cN | 117 mm | 7, 10, 15, 20, 30, 41 mm |
| DTXB-10K | 0.5 - 10 Kg or daN | 0.01 Kg or daN | 117 mm | 7, 10, 15, 20, 30, 41 mm |
| DTXB-20K*** | 1 - 20 Kg or daN | 0.01 Kg or daN | 167 mm | 7, 10, 15, 20, 30 mm |
| DTXB-30K*** | 1.5 - 30 Kg or daN | 0.01 Kg or daN | 217 mm | 7, 10, 15 mm |
| DTXB-50K*** | 2.5 - 50 Kg or daN | 0.01 Kg or daN | 217 mm | 7, 10 mm |
* Depending on model, either width of filament guide or outer distance between outside guide rollers
** Outer distance between outside guide rollers
***Lever no longer required for high capacity models
** Outer distance between outside guide rollers
***Lever no longer required for high capacity models
Option MH
for stationary use. With distance bolts with M5 female thread on the rear side.
for stationary use. With distance bolts with M5 female thread on the rear side.
Option WL
Wi-Fi Output
| Roller Width | Line Speed Vmax ...m/min |
Roller Material* |
|---|---|---|
| 7 mm | 2000 | Nickel-plated steel |
| 10 mm | 1000 | Hard-coated aluminium |
| 15 mm | 1000 | Hard-coated aluminium |
| 20 mm | 1000 | Hard-coated aluminium |
| 30 mm | 1000 | Hard-coated aluminium |
4 Memory Modes:
- Mode S: statistics only (Last, Avg, Max. Min, Peak-Max, Peak-Min, Std Dev, # of records)
- Mode H: storage of the X-Y-diagram for reviewing after finishing a series of measurements
- Mode C: continuous logging over a user set time and different series of measurement (2 Hz)
- Mode F: fast, continuous logging at 1 kHz over a user set time and different batches (1000 samples/sec)
Tension meter DTXB with carrying case, accumulator and AC adapter with country adapters (EU, US, UK), USB cable, Software Tension Inspect 3, Certificate of compliance with the order 2.1 according EN 10204 free of charge, operating instruction
| Accuracy | For PA from 5 % up to 100 % FS*: ± 0.5 % FS* ± 1 digit remaining tension range and other calibration materials: ±3 % full scale and ±1 digit |
| Memory for material curves | 1 for factory calibration plus 4 for customized calibrations |
| Measuring units | Tension: cN, daN, g, kg, N, lb (user-selected) Thickness : mm, inch (user-selected) |
| Overrange | Approx. 10 % FS*, full scale, without accuracy guarantee |
| Overload protection | 100 % full scale |
| Measuring principle | Strain gauge bridge |
| Measuring roller deflection | Max. 0.2 mm |
| Signal processing | Digital, 16 bit A/D converter |
| Measuring frequency | Max. 1 kHz (1000 measurings/sec.), intern 8 kHz |
| Display | Graphic LCD, Backlit (user-set: on/off/auto) |
| 3 different displays | Numeric, Numeric with graph (time-tension), X-Y-diagram |
| Display update rate | Approx. 2 times per second |
| Memory | MIN, MAX, PEAK, AVG and LAST |
| Damping | User-adjustable electronic damping (averaging) calculated by [X-Values OLD + Y-Values NEW] ÷ 9 |
| Cal. Adjustment | ± 10 steps in 1 % increment |
| Thickness compensation | Max. 2.5 mm (not available for all models) |
| Auto power off | Approx. 3 minutes of non-use |
| Temperature coefficient | Gain: less than ± 0.01 % FS* /°C Zero point: less than ± 0.3 % FS* /°C |
| Temperature range | 10 - 45 °C |
| Air humidity | 85 % RH, max. |
| Power supply | Rechargeable Lithium Polymer Battery provides 40 hours of continuous operation, charging time approx. 3-1/2 hours includes AC-Adapter/Charger 100 – 240 V AC (with EU, USA, UK plug adapter) |
| Housing material | Die-cast aluminium |
| Weight, net (gross) | Up to DTS-50K approx. 875 g / 1550 g DTS-60K-V1 approx. 1040 g / 2700 g |
| Output Signal | USB |
| Memory | 60,000 values at 255 measuring periods |
| Memory Modes | 4 memory modes with statistical evaluation |
| Replacement Battery | E08711-X |
| Replacement Charger | USB-MINI-CHARGER |
Thank You
Thank you for your quote request, we will contact you within 1-2 business days.
There was an error submiting the form. Please try again.
