Web Orders Over $100 Ship Free. Enter Promo Code "SHIPFREE" for free UPS Ground Shipping at Checkout. (USA Only)

DS2-110 Digital Force Gauge, 110 lbs / 50 Kg / 500 N Capacity Replaced by DST. Click here to go to the DST page.

Made in Japan
DS2 force gauge
Click images to enlarge.

Replaced by DST. Click here to go to the DST page.

7 Ranges up to 220lbs
Measures Push / Pull Force

The DS2 is a versatile Digital Force Gauge that measures push and pull forces. An ergonomic metal housing protects the highly accurate loadcell and electronics in tough industrial environments.

When measuring, units of measure and a tension or compression icon are displayed. A battery icon indicates the NI-MH batteries are low. If an overload occurs the display will flash to warn you.

If desired, you can program high/low setpoints to enable Go/NoGo testing using the LCD indicators. Standard outputs (RS-232C, Digimatic, and ±1VDC analog) enable you to acquire data for permanent record.

All DS2 gauges can run on the internal NI-MH batteries or the AC adapter/charger. An optional handle to facilitate the measurement of heavy loads is also available.

DS2 force gauge handleOptional Handle DOH-1


  • Real time and peak mode (selectable)
  • RS-232C, Digimatic and analog outputs
  • 2 Year Warranty
  • lb, kg, and Newton units are push-button selectable
  • Ergonomic, heavy-duty metal construction
  • Overload alarm, low battery display indicator
  • Runs on internal NI-MH batteries or AC adapter
  • Overload capacity 200% F.S.
  • Supplied with NIST-Traceable Calibration certificate
  • Programmable High/Low setpoints with LCD indicators
  • User selectable sampling rate, 30 or 1000 per/second (Hertz)
  • Reversible Display
  • ISO/IEC 17025 Long-form Certificate & Test Data is optionally available
  • 2 Year Warranty

Force Ranges

DS2-0.47.00 oz
200 g
2.000 N
0.01 oz
0.1 g
0.001 N
DS2-118.00 oz
500 g
5.000 N
0.01 oz
0.1 g
0.001 N
DS2-44.400 lb
2.000 KG
20.00 N
0.001 lb
0.001 Kg
0.01 N
DS2-1111.00 lb
5.000 Kg
50.00 N
0.01 lb
0.001 kg
0.01 N
DS2-4444.00 lb
20.00 Kg
200.0 N
0.01 lb
0.01 kg
0.1 N
DS2-110110.0 lb
50.00 Kg
500.0 N
0.1 lb
0.01 kg
0.1 N
DS2-220220.0 lb
100.0 Kg
1000 N
0.1 lb
0.1 kg
1 N

Related Products

DST Digital Force Gauge
Click image for more info
Digital Force Gauge
- Backlit LCD display with user-friendly menus
- 30,000/sec sampling rate
- USB and RS-232C output
SW-1 Software for force and torque
Click image for more info
Data Acquisition Software for Force Gauges & Torque Gauges
- Full SPC and graphing capabilities
- Automates your data collection
- Provides a running log of all measurements along with a chart of the data as well as statistical information
Imada HV-110 Test Stand
Click image for more info
Manual Hand-Wheel Force Test Stand
- Hand wheel design provides a high degree of precise control
- Optional digital distance meter
Click image for more info
Motorized Test Stand - REPLACED BY MX-110
- Screw feeder for smooth, positive movement
Click image for more info
MESURgauge / MESURgauge Plus Load & Travel Analysis Software
- Acquire continuous or single-point data from force and torque measuring instruments and test stands.


Standard Attachments

Special Attachments

Complete Kit

All DS2 gauges are sold in a complete kit with gauge, hard plastic carrying case, a set of six standard attachments, NIST Traceable Calibration Cert, Instruction Manual and AC adapter/charger.


Accuracy:± 0.2% Full scale ± 1 LSD
Display:4 digit, 12 mm high
Overload capacity:200% Full scale,
display flashes beyond 105% full scale
Data Processing Speed1,000 data/second (30 data/second rate selectable)
Display Update10 times per second
OutputsRS-232, Mitutoyo Digimatic and ±1 VDC analog output
Temperature range:32° to 100° F (0 - 40° C)
Low battery indicator:Display flashes when battery is low
Power supply:Rechargeable NiMH battery pack or AC adapter (included)
SetpointsProgrammable high/low setpoints with LCD indicators
Housing dimension:215 x 65 x 51 mm (L x W x H)
Weight, net (gross)approx. 430 g (1300 g)
Warranty2 Years

Buy Now

Item Description Price
Digital Force Gauge, 110 lbs / 50 Kg / 500 N Capacity Replaced by DST. Click here to go to the DST page.
ISO-17025 Accredited Calibration with Certificate
Handle for digital DS2 Force Gauge
RS-232 Serial Output Cable
Windows Software for DS2 Force Gauge (Required Excel)
Analog Output Cable
Digimatic SPC Cable
Small Hook up to 20 lbf, #10-32 thread
Replacement AC Adapter / Power Supply, 115V FOR DS2 Force Gauge
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.