The WT3-201M motorized wire pull tester measures pull-off forces of up to 200 lb / 100 kg on crimped terminals. The WT3-201M tests according to UL 486A, ISO, ASTM, SAE, MIL, and other testing standards. The WT3-200M can perform destructive or optionally Non-destructive testing, such as pulling to a load or maintaining a load for a specified period of time, as per the requirements of UL 486A/B. Programmable pass/fail limits with red and green indicators and audio alerts help identify non-conforming samples.
The tester accommodates wire sizes up to AWG 3 (0.25 in [6.3 mm] OD), or custom sizes via the available machinable blank fixture. Auto-start automatically begins the test when the wire sample has been loaded. When the sample breaks, the tester can auto-reverse, output the peak force, store the peak force, and zero the display automatically, thereby increasing testing throughput. Further testing efficiency is achieved via the available Profiles function, through which multiple test setups may be saved and recalled as required.
On-board data storage and statistical calculations is provided for up to 2,000 readings, with available date and time stamp for each saved data point. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs.
The WT3-201M includes MESURLite data acquisition software. MESURLite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.
The tester accommodates wire sizes up to AWG 3 (0.25 in [6.3 mm] OD), or custom sizes via the available machinable blank fixture. Auto-start automatically begins the test when the wire sample has been loaded. When the sample breaks, the tester can auto-reverse, output the peak force, store the peak force, and zero the display automatically, thereby increasing testing throughput. Further testing efficiency is achieved via the available Profiles function, through which multiple test setups may be saved and recalled as required.
On-board data storage and statistical calculations is provided for up to 2,000 readings, with available date and time stamp for each saved data point. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs.
The WT3-201M includes MESURLite data acquisition software. MESURLite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.
The WT3-201M is an alternative to Alphatron Daniels MPT-250C, and MPT-200A.
- 3 Year Warranty
- Measures real-time and peak force values
- Selectable test speed, w/high speed approach and reverse
- Auto-start upon sample insertion
- Auto-reverse at sample break or load
- USB, RS-232, Mitutoyo (Digimatic), and analog outputs
- Automatic reverse / output / data storage / zeroing upon sample break helps automate testing processes
- 2,000-point data memory with statistics, output, and date and time stamp (date and time stamp is optional)
- Password protection prevents unauthorized changes
- Pass / fail indicators, audio alerts, and outputs
- Save and recall up to 500 profiles for various test requirements (optional function)
- Pull to a specified load or maintain load for a specified period of time, as per UL 486A/B (optional functions)
- Date / time stamp for all saved data (optional function)
Feature | Part No. | Description |
---|---|---|
Save Multiple Profiles | WF010 | Save and recall sets of test parameters, such as speed, pass/fail limits, unit of measurement, etc. Maximum of 500 profiles may be stored. |
Pull to load | WF011 | The tester will stop when the specified load has been reached. |
Load holding | WF012 | The tester will stop and maintain a specified load for a specified period of time. |
Date and time stamp | WF013 | A date and time stamp is applied to each saved data point. |
Complete options package | WFCOMP | Includes all optional functions listed above. |
Any of these optional functions may be purchased at time of order or may be enabled in the field at a later date though a simple activation process. A complete options package is also available, including all of the listed features at a discounted price. The tester is shipped in Demo Mode, during which time all available functions are enabled for 160 hours of operation.
Capacity x Resolution | 200 x 0.1 lbF | 3200 x 2 ozF | 100 x 0.05 kgF | 1,000 x 0.5 N | 1 x 0.0005 kN |
Accuracy | ±0.2% of full scale |
Wire gauge range | AWG30 - AWG 3 [0.01 - 0.25 in (0.3 - 6.3 mm)] |
Minimum Sample length | 6.5 in [165 mm], excluding termination |
Max. elongation | Test speed: 0.4 - 12.0 in/min [10 - 300 mm/min] Approach/reverse speed: 13.0 - 96.0 in/min [325 - 2,400 mm/min] |
Speed setting accuracy | ±0.2% |
Speed variation with load | ±0% [Stepper motor driven] |
Power | Universal input 80-240 VAC, 50/60 Hz |
Battery Life | Backlight on: up to 7 hours of continuous use Backlight off: up to 24 hours of continuous use |
Sampling rate | 7,000 Hz |
Outputs | USB / RS-232: Configurable up to 115,200 baud. Mitutoyo: Serial BCD suitable for all Mitutoyo SPC-compatible devices. Analog: ±1 VDC at capacity, ±0.25% of full scale. General purpose: Three open drain outputs, one input. Set points: Three open drain lines. |
Safe overload | 150% of full scale (display shows "OVER" at 110% and above) |
Weight | 26.5 lb [12.0 kg] |
Included items | Power cord, quick-start guide, USB cable, resource CD (USB driver, MESUR™ Lite software, MESUR™gauge DEMO software, and user's guide), and NIST-traceable certificate of calibration. |
Environmental requirements | 40 - 100°F, max. 96% humidity, non-condensating |
Warranty | 3 years |
Item | Description | Price | ||
---|---|---|---|---|
WT3-201M | Motorized Wire Pull Tester, 200lb / 100kg / 1000N Capacity, USA Plug | $4,645.50 | ||
Accessories | ||||
WT3-201M Optional Features | ||||
WF010 | Save multiple profiles OPTION for WT3-201M | $895.00 | ||
WF011 | Pull to load OPTION for WT3-201M | $675.00 | ||
WF012 | Load holding OPTION for WT3-201M | $1,010.00 | ||
WF013 | Date & time stamp OPTION for WT3-201M | $620.00 | ||
WFCOMP | All Options Package for WT3-201M (WF010, WF011, WF012, WF013) | $2,080.00 | ||
General Accessories | ||||
CERT | Upgrade to NIST Traceable Calibration Certificate WITH DATA | $85.00 | ||
ISO-17025-UPG | Upgrade from NIST traceable cert to ISO-17025 Certificate | $275.00 | ||
Calibration kit for WT3-200/1/M, weights not included | $1,000.00 | |||
MESUR gauge Load & Travel Analysis Software - NO LONGER AVAILABE, Order Mesurgage Plus - Please contact us for pricing and availability. | $ | |||
Ring terminal fixture insert for WT3-200/1/M/G1076 | $220.00 | |||
WT3003 | Machinable blank terminal fixture insert | $200.00 | ||
WT3004-1 | Carrying Case for WT3-201M | $285.00 | ||
AC1109 | Serial Output Cable DB9 for M10 Force / Torque Gauges, old PN 09-1163 | $80.00 |
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable