Available with a set of heavy-duty self-tightening wedge grips or a combination of wedge grip and wire wrapping grip to securely hold your samples. A hook is also included which can be used to grip ring terminals.
Measurement accuracy is ±0.1% of full scale, and resolution is 0.5 lbs / 0.2 Kg / 2 N. A large, backlit LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges’ many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs.
On-board data memory for up to 1,000 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force.
- Includes NIST Traceable Calibration Certificate
- 3 Year Warranty
- Test for UL 486 & Mil Spec and other standards
- Display force values in peak or real-time measuring mode
- Modular system can be used for many other tension and compression testing applications
- USB, RS-232, Mitutoyo, and analog output
- Peak readings and set points always displayed
- 13 inches of clearance without grips. 4 inches of travel.
|Stroke||4.00" (102 mm)|
|Travel Rate||0.013" (0.34 mm)/wheel rev|
|Sampling Rate||7,000 Hz|
|Accuracy||± 1lbs / 0.5 Kg / 5 N|
|Power||AC or rechargeable battery (NiMH). Low battery indicator appears when battery level is low, and gauge powers off automatically when power reaches critical stage.|
|Battery Life||Backlight on: up to 7 hours of continuous use|
Backlight off: up to 24 hours of continuous use
|Measurement Units||lbF,ozF,gF,kgF,N,kN,mN (depending on model)|
|Outputs||USB / RS-232: Fully configurable up to 115,200 baud. Includes Gauge Control Language 2 for full computer control.|
Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatibile devices.
Analog: ±1V DC, ±0.25% of full scale at capacity.
General Purpose: Three open drain outputs, one input.
Set Points: Three open drain lines.
|Configurable settings||Digital filters, outputs, automatic output (via USB/RS-232), automatic shutoff, default settings, averaging mode, external trigger, passwords, key tones, audio alarms, backlight, calibration|
|Safe Overload||150% of full scale (display shows "OVLD" at 110% and above)|
1. TSF - High Capacity Test Stand
2. M5-1000 - Digital Force Gauge
3. G1061-2 - Wedge Grip
4. G1094 - Wire Cam Grip
5. AC1047-1 - Base Eye-End
6. TSF-EXT6 6inch Column Extension
1000Lb Capacity Pull Test System with stand, gauge and 2 wedge grips
Digital travel display
6 Inch Column Extension, (included with WTT-1000-CG)