Orders Over $100 Ship Free. Enter Promo Code "SHIPFREE" for free UPS Ground Shipping at Checkout. (USA Only)

LS-9-LED-WB 9 Inch LED Stroboscope in 18 Inch Wide-Body Housing, Requires 24V power

Made in Germany
LS-9-LED inspection stroboscope
Click images to enlarge.
The new LS-9-LED is a high-performance stationary LED-stroboscope with powerful light output and uniform light distribution over a large area for use on web-widths up to 500mm (20 inches) and wider.

High light output
Due to the use of 120 of the industry's latest high-performance LEDs, the LS-9-LED offers a powerful light intensity. The large, homogenous illumination surface delivers superb results even at difficult light conditions, making the LS-9-LED suitable for a very wide range of measurement, observation and inspection functions. It is especially suitable for demanding applications, such as those in the printing industry.

Superb image sharpness
With an adjustable flash duration from1-1000 μseconds, you will easily find the best combination between light intensity and sharp images for every application.

Flexible adjustments to all applications
Alternatively, the stroboscope can be controlled directly by the trigger signal of your system without the need for additional control units or by various RT STROBE control devices. When using these trigger options simultaneously, you can easily alternate between the signal inputs by using the switch on the reverse side of the device.

Additional control options
LS-5-FCM - a simple and inexpensive unit for controlling flash frequency. You simply insert this small control unit into one of the sockets on the reverse side of the device.

LS-5-RCU - for adjusting the flash frequency, phase shift, delay time and trigger divider. This unit is connected to the stroboscope by cable and provides the convenience of remote control even if the stroboscope within your machine is difficult to access.

Features

  • LEDs provide lifetime use and never require replacement
  • Extremely bright and uniform light distribution over an area of 300 x 500mm (12" x 20")
  • Uses 120 of the newest generation LEDs in a 15 x 8 array providing 7500 Lux, peak
  • For web widths > 500 mm (20"), Two (2) or more strobes can be connected in parallel
  • Requires 24V DC Power (Not Included), An optional power adapter is available.
  • Connection include two (2) trigger inputs and 1 trigger output. Power can be connected in either of these 3 locations
  • Adjustable brightness and image sharpness permits operator to optimize strobe for each application

LS-9-LED-WB - Wide-Body Housing

We offer a special configuration of the LS-9-LED Linear Stroboscope packaged in 440 mm width housing (17.3 inches) designed to provide a more aesthetically-pleasing solution when the strobe is fixed-mounted on a machine frame that is 18 inches or wider (460 mm+).

The 120 LEDs are spread in three (3) separate "clusters" each containing 40 LEDs, arranged in a 5x8 array. The position of each "cluster" is optimized to provide the optimal light uniformity over the entire illumination area with the same effective brightness as the standard version of the LS-9-LED (7500 Lux, peak). This model is popular with OEM Machine Manufacturers of Slitter/Rewinders and similar machines used in the label and printing industries.

Light Output (LUX) vs Distance

Overview of LCD Strobe Models

Model LEDs Array Size Brightness (peak) Housing Width Price (US$)
LS-3-LED 40 10 x 4 5000 Lux 150 mm
(6 inch)
795
LS-5-LED 80 10 x 8 6000 Lux 150 mm
(6 inch)
1295
LS-9-LED 120 15 x 8 7500 Lux 230 mm
(9 inch)
1995
LS-9-LED-WB 120 5 x 8 (3x) 7500 Lux 440 mm
(17 inch)
2395
LS-18-LED 200 25 x 8 9000 Lux 440 mm
(17 inch)
2995
LS-36-LED 480 60 x 8 14000 Lux 948 mm
(37 inch)
5495

Related Products

LS-FCM, A6-1050, RT STROBE eco control
Click image for more info
Flash Control Module
Stroboscope Control Unit - LS-SCU
Click image for more info
Remote Control Unit
Label Sensor for Triggering On Label Gaps - LS-GAPSENSOR
Click image for more info
Label Sensor for Triggering On Label Gaps
- Only label sensor on the market that is immune to the interference caused by a strobe.
registration mark sensor
Click image for more info
Registration Mark Sensor
- Color Mark registration detection on transparent and translucent, including many metalized films and paper
ls-5-led stroboscope
Click image for more info
LED Inspection Strobe Light
80 LEDs in 10 x 8 array
- Extremely bright and uniform light distribution for web widths up to 12" (300mm) and wider.
ls-18-led stroboscope
Click image for more info
LED Inspection Stroboscope
200 LEDs in 25 x 8 array
- Light intensity of 9000 Lux peak from 200 LEDs
Click image for more info
Reflective Sensor
LS-ARM Stroboscope Mounting Arm, Articulating Swing Arm
Click image for more info
Stroboscope Mounting Arm, Articulating Swing Arm

Specifications

Frequency Range0...120000 FPM (flashes per minute)
Power Required24V DC (21.6….26.4VDC) / 0.6A (19.2 Watts)
Universal AC power supply sold separately, pn LS-AC-WORLD
External Trigger Input3...30 V / max. 5 mA
Potential-free optocoupler
DIN 41524 5-pin standard plug
Uout = Uin, max. 200 mA
switchable trigger input
Trigger Outputfor connection to 2nd Strobe (Slave)
Illumination Intensity7500 Lux, max (30 cm area at 12"@3°)
Light intensity/sharpnessadjustable with turning knob
Illumination intensity single flashca. 1 Mega-Lux/30cm / 12"
Illumination area30x50 cm/12 x 20 inches
Flash colorca. 5000...8.300 K
MaterialAluminum
Dimensions230x130x112 mm / 9,1x5,1x4,4
Weight1.400 g
Ambient temperature0°...40°C (32°...114°F)
Storage temperature-25°C...70°C (-10°...125°F)
Humiditymax. 95% not condensing
CertificationsCertificate of CE conformity
Warranty1 Year
Mounting HolesLocated on underside of housing:
(1) 1/4 - 20UNC in center
(2) M5 Threaded Inserts (60 mm c:c) outer
Manual Test TriggerPin1 (+24V)
Pin3 (0V)
Jump Pin1 to Pin4
Momentarily Jump Pin3 to Pin5

Downloads

Buy Now

Item Description Price
LS-9-LED-WB
9 Inch LED Stroboscope in 18 Inch Wide-Body Housing, Requires 24V power
$2,395.00
Accessories
LS-AC-WORLD
24V Power Supply for use with LS Linear Strobes or LS-SCU, 100-265V AC. NOT REQUIRED IF 24V DC AVAILABLE
$99.00
Flash Control Module for manual adjustment of flash rate, A6-1050
$129.00
Remote Control Unit and connection cable
$355.00
Articulating Swing Arm for Stroboscopes
$215.00
LS-CABLE-PT
Connection cable to transfer both POWER and TRIGGRER from Primary to Slave Strobe, 5 ft length
$75.00
LS-CABLE-EXT
Extension Cable for LS Strobes, 2 meter with 5-pin MALE/5-pin FEMALE DIN Connectors
$75.00
LS-CABLE-EXT-5M
Extension Cable for LS Strobes, 5 meter with 5-pin MALE/5-pin FEMALE DIN Connectors
$95.00
Label Sensor for Triggering On Label Gaps
$125.00
LS-REGSENSOR Registration Mark Sensor
$149.00
LS-DIN
5-pin DIN Connector for use with all LS-Strobes and LS-SCU Strobe Controller
$10.00
Tripod for Tachometers and Stroboscopes
$35.00
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable