Measuring Range in Steel
0.0060 - 1.000 inches
0.150 - 25.40 mm
The TI-007DL is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments.
The TI-007DL incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.
The gauges have a MEASURING RANGE from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in ECHO-TO-ECHO MODE as well as automatically switch to interface echo mode when measuring thicker materials and plastics.
- Resolution of 0.0001 inch (0.001 mm)
- Selectable units of inch or mm
- Memory for 1000 data points in up to 10 batches
- RS-232C Serial output for downloading stored data to a printer or computer
- TI-007DL-GT model available with Graphite Tip for measuring plastics
- Windows compatible data transfer program supplied at no additional cost.
- Large, backlit LCD display retains last reading
- CE Certified
- Includes NIST-Traceable Calibration Certificate
- IP 65 Rated
|P/N||Description||Standard / Optional||Image|
|X-231-0000||1/4" x 3/8"
for all metals
|X-241-0000||1/4" x 1/2"
for all metals
|X-633-0000||1/4" x 3/8"
for thin plastics
|Standard on "-GT" models|
|Range in Steel||0.0060-1.0000" (0.15-25.40 mm)|
|Resolution||.0001" (0.001 mm)|
|Display||4½ - Digit, 0.5" Backlit LCD|
|Velocity Range||0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec|
|Transducer||Single element with delay tip. 10 to 22 MHz frequency range.|
|Probe Wearface||PEEK (Polyethlethylketone)|
|Cable||4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. (30 m)|
|Serial Output||RS-232C (8, N, 1, user-set baud rate)|
|Temp. Limits||Ambient: -20 to 120° F (-30 to 50° C)|
Material: 0 to 200° F (-20 to 100° C)
|Battery Type||Two AA batteries|
|Battery Life||150 hours|
|Weight||7 ounces (300g)|
|Size||2.5 x 4.5 x 1.25"|
(64 x 114 x 32 mm)
|Accessories Included||Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.|
|Warranty||Gauge: 5 Years|
Probes: 90 Days
|Security Lock Mode||Hold down the DOWN ARROW Key as you power th gauge on. The "LOC" function with toggle on/off|
Replaced by TI-007DLX Data Logging Precision Ultrasonic Wall Thickness Gauge kit with T-402-5507 probe
Replaced by TI-007DLX Data Logging Precision Ultrasonic Wall Thickness Gauge kit with T-402-5507 probe and Graphite Tip For Measuring Plastics
Protective Holder for Most TI Series Gauges, F-112-0005
Coupling Fluid - 12 oz / 354 ml
1/4" x 3/8" Length Delay Line tip for use with T-402-5507 transducer
1/4" x 1/2" Length Delay Line tip for use with T-402-5507 transducer
1/4" x 3/8" Graphite Tip Delay Line tip for use with T-402-5507 transducer
1/4" diameter, 15 MHz delay line transducer with cable, 1/2" and 3/8" length delay line tips
LEMO 00 - Microdot Single Probe Transducer Cable, 4 foot length
4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit