Web Orders Over $100 Ship Free. Enter Promo Code "SHIPFREE" for free UPS Ground Shipping at Checkout. (USA Only)

HPX High Penentration Ultrasonic Thickness Gauge

Made in USA
Dakota HPX DL+ High Penentration Ultrasonic Thickness Gauge
Click images to enlarge.
The HPX DL+ Ultrasonic Thickness Gauge is designed for use on materials that are difficult for sound to penetrate, due to the lack of material consistency, grain structure, and overall thickness. Multiple high voltage pulser options, as well as filters tuned for lower frequency transducers (500 kHz – 10 MHz), the HPX compliments our product range by adding additional material types to our list of application possibilities.

Typical applications are fiberglass sheets, pipes, storage tanks, aerospace composites, boat hulls, conveyor belts, composite plastics, etc. There are a variety of features and tools to accommodate a number of material types and applications.

The electronic platform is FPGA driven for speed and accuracy. The screen refresh rate of 25 Hz contributes to the overall responsiveness of the gauge. The built-in data logger has two file format options, grid or sequential, and is equipped with an internal 4 GB SD card for memory. Connectivity to a standard PC or Apple via USB-C, and used in conjunction with our Windows® PC or OSX reporting software available for download.

Features

  • Supplied with NIST Traceable Calibration Certificate
  • 2 Year Warranty
  • 4gb of memory for saving Grids, Sequential Data, Screen Captures, and 64 Setups
  • USB Data Output
  • A-Scan, B-Scan, and Digit Display Modes

Specifications

Pulse-Echo RangeSteel .050 in. – 100.0 ft. (1.27 mm – 30.5 M)
Composites .100 in. – 5.00 in. (2.54 mm – 127 mm)
Echo-Echo RangeSteel .100 in.–3.0 ft. (2.54 mm–91.44 cm)
Echo-Echo Verify RangeSteel .100–6.0 in. (2.54–152.4 mm)
Resolution(selectable): +/- .01 inch (0.1 mm). +/- .001 inch (0.01 mm)
Velocity Range0.0122 to 0.7300 inches/µs 309.88 to 18542 meters/sec.
PulserSpike – 200 volt, Square Wave – 400 volt, Tone Burst 400 volt, all adjustable with variable pulse widths and voltage settings
ReceiverManual or AGC gain control with 110dB range, varies with mode selected. Adjustable damping (50, 75, 100, 300, 600 & 1500 ohms)
Frequency Range500 kHz to 10MHz
TimingPrecision TCXO timing with single shot 100 MHz 8 bit ultra low power digitizer
PowerThree AA cells. Alkaline – 35 hrs, Nicad – 10 hrs, and NI-MH – 35 hrs. *dependent on pulser & backlight settings.
Operating Temperature14 to 140F (-10C to 60C)
Data OutputUSB-C port. Windows® PC interface software
Display1/8in VGA grayscale display (240 x 160 pixels); viewable area 2.4 x 1.8in (62 x 5.7mm); EL backlit (on/off/auto invert)
Transducer CompatibilitySingle Contact (1 to 10 MHz, and custom 500 kHz delay line (HPD1005B)
Transducer ConnectorLocking quick disconnect LEMO “00” connector
DimensionsWidth (2.5in/63.5 mm) Height (6.5 in/165 mm) Depth (1.24 in/31.5 mm)
Weight13.5 ounces (with batteries)

Complete Kit

The HPX DL+ is supplied as a complete kit including HPX gauge, custom 1” Delay Line Transducer (Rubber Delay Line) & Cable, Couplant, Manual, Certificate of Calibration, AA Batteries, PC Software (download), and transfer cable in a foam fitted carrying case.

Downloads

Buy Now

Item Description Price
High-Penetration Ultrasonic Wall Thickness Gauge with T-857-8608 Delay Line Transducer - Z-225-0001
$3,650.00
Accessories
T-857-8608
1" x 0.5MHz Single Element Delay Line High Penetration Transducer
$1,050.00
Protective Rubber Boot for Tall Format Ultrasonic Thickness Gauges
$110.00
BNC - LEMO 00 Single Probe Transducer Cable, 6 foot length
$75.00
V-000-0005
Low Viscosity Coupling Fluid, 4 oz bottle
$22.50
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable