The Dakota MX1-DL (formerly MMX-7) is a full featured ultrasonic thickness gauge offering an oversized display as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values.
The Dakota MX1-DL (formerly MMX-7) features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use.
- The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
- Built in hardware AGC gain control for through paint measurements in multi mode operation.
- The MMX-7 has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
- CE Certified
- Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
- The MMX-7 also comes complete with our Windows® PC software for transferring data to and from a PC.
- The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned.
- Use the AUTOFIND feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
- Includes NIST-Traceable Calibration Certificate
- 2 Year Warranty
The MMX-7 is supplied as a complete kit with the gauge, T-102-2700 probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case.
Range in Steel: | Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches) Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.100 - 4.000 inches). Range will vary depending on the thick |
Resolution: | .001 inches (0.01mm) |
Velocity Range: | .0492 to .3936 in./ms 1250 to 9999 meters/sec |
Units: | English & Metric |
Measurement Modes: | - Pulse-Echo (flaws, pits) - Echo-Echo (thru-paint) |
Transducer Types: | Dual Element (1 to 10 MHz). |
Memory: | 16 megabit non-volatile ram |
Memory capacity: | 12,000 pages with 1 reading and waveform per page |
Power Source: | Three 1.5V alkaline or 1.2V NiCad AA cells |
Battery Life: | Typically operates for 150 hours on alkaline and 100 hours on NiCad |
Auto Power off: | if idle 5 min |
Display: | 1/8 in. VGA grayscale display 62 x 45.7mm |
Keyboard: | Membrane switch with twelve tactile keys |
Case: | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). |
Operating Temperature: | -14° to 140°F (-10° to 60°C) |
Weight, net: | 383 grams |
Dimensions: | 63.5 W x 165 H x 31.5 D mm |
Warranty: | 2 year limited |
Certification: | CE Approved, Factory calibration traceable to national standards |
Item | Description | Price | ||
---|---|---|---|---|
MMX-7 | Dakota MX1-DL Ultrasonic Thickness Gauge with T-102-2700 PROBE, Z-160-0003 / Z-160-0005 | $2,350.00 | ||
Accessories | ||||
Protective Rubber Boot for Tall Format Ultrasonic Thickness Gauges | $115.00 | |||
Protective Holder for Long Body UT Gauges, F-149-0001 | $85.00 | |||
1/4" diameter, 5.0 MHz Hi-Damped transducer for thru paint measurement, Side In, Potted | $360.00 | |||
1/2" diameter, 1.00 MHz dual element Composite transducer, Side In, Potted | $375.00 | |||
1/2" diameter, 2.25 MHz dual element transducer, Side In, Potted | $330.00 | |||
1/4" diameter, 2.25 MHz, dual element transducer, Side In, Potted | $320.00 | |||
1/2" diameter, 5.0 MHz dual element transducer, Side In, Potted | $330.00 | |||
3/16" diameter, 5.0 MHz dual element transducer, Side In, Potted | $320.00 | |||
1/4" diameter, 7.5 MHz, dual element transducer, Side in, Potted | $355.00 | |||
1/2" diameter 5.0 MHz dual element transducer Hi-Temp (650 F/344 C), Side in, Microdot | $405.00 | |||
USB-RS232-ADAP | RS232 to USB Adapter | $25.00 | ||
1/4" diameter, 5.0 MHz dual element transducer Hi-Temp (900 F/500 C) Top in, Microdot | $470.00 |
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable