The type "J" and "K" Pocket Dial Thickness Gauges are available with either the Imperial or the Metric dial face. Both are supplied with flat contact points 6.35 mm Ø if no other form of contact points is ordered. When ordering, please state whether you require another form of contact point other than 6.35 mm Ø flat. The optional contact points 10 mm Ø flat, convex or spherical are supplied at the same price and shown below. The contact points are pressed into the frame at the factory and not interchangeable. On request the Pocket Dial Thickness Gauges K 15 and K 15/2 can be supplied with a spindle blocking screw. The instruments can easily be set to zero by turning the knurled bezel.
- Comes with standard contact point, 6.35mm diameter, flat.
- Optional contact points available; 10mm Ø flat, convex, or spherical.
- Accuracy according to manufacturing standard 0.0500.9.0004 (hysteresis fu however not checked).
- Made in Germany
|Model||Resolution||Range||Jaw Depth||Lifting Device||Contact points mm*|
|K15M||0.1 mm||10 mm||15 mm||No||6.35 Ø flat*|
|K15/2M||0.1 mm||20 mm||15 mm||No||6.35 Ø flat*|
|J12M||0.01 mm||8 mm||12 mm||Yes||6.35 Ø flat*|
|J15M||0.01 mm||10 mm||18 mm||Yes||6.35 Ø flat*|
|J45M||0.01 mm||10 mm||45 mm||Yes||6.35 Ø flat*|
|KZ15||0.4 inch||0.6 inch||No||6.35 Ø flat*|
|KZ15/2||0.8 inch||0.6 inch||No||6.35 Ø flat*|
* 10 mm Ø flat, convex, or spherical optionally available.
Pocket Analog Thickness Gauge, 1.8 inch Depth, 0.4 inch Range
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.