The new CHECKLINE model LS-18-LED Linear Strobe is designed for fixed-mounting on a wide variety of machinery and for various visual inspection tasks. It utilizes 200 high-performance LEDs arranged in a 25 x 8 array to produce a bright/sharp image with a uniform light distribution for web widths up to 20" (500mm) and wider. For wider coverage, two (2) or more Strobes can be combined in a Master/Slave arrangements using an interconnect cable to transfer the trigger signal from one to the other for perfect synchronization. The LS-18-LED uses the industries latest high-performance LEDs to provide lifetime use, never requiring replacement. Their whisper-quiet operation and superb light intensity and uniformity make this linear stroboscope suitable for use in the toughest production environments and for a wide range of measurement, observation and inspection functions. Typical applications include those in the printing, steel processing and label-printing industries. Adjustable brightness and image sharpness allow the user to optimize the strobe based on ambient lighting conditions, flash rate, image size and other operating parameters, allowing the user to find the best balance between light intensity and image sharpness for every application. The LS-18-LED is fitted with the ability to be controlled from two separate inputs with a toggle switch to select between the two. Flash rate can be controlled externally from a sensor or from a machine controller, or from a variety of optional control accessories that are detailed below. LS-FCM Flash Control Module: A simple and inexpensive unit for controlling ﬂash frequency. You simply insert this small control unit into one of the two inputs on the reverse side of the strobe. LS-SCU Strobe Controller: For adjusting the ﬂash frequency, phase shift, delay time and trigger divider. This unit is connected to the stroboscope by cable and provides the convenience of remote control if the stroboscope out of the line of sight or reach of the operators.
- Extremely bright and uniform light distribution for web widths up to 20" (500mm) and wider.
- Light intensity of 9000 Lux peak from 200 LEDs
- Connections include two trigger inputs and one trigger output. Power can be connected in either of these three locations.
- LEDs provide lifetime use and never require replacement.
- Requires 24V DC Power (Not Included), An optional power adapter is available.
- For web widths greater than 20" (500mm), two or more strobes can be connected in parallel using the LS-CABLE-T. Each strobe would require it's own power supply.
|Model||LEDs||Array Size||Brightness (peak)||Housing Width|
|LS-3-LED||40||10 x 4||5000 Lux||150 mm
|LS-5-LED||80||10 x 8||6000 Lux||150 mm
|LS-9-LED||120||15 x 8||7500 Lux||230 mm
|LS-9-LED-WB||120||5 x 8 (3x)||7500 Lux||440 mm
|LS-18-LED||200||25 x 8||9000 Lux||440 mm
|LS-36-LED||480||60 x 8||14000 Lux||948 mm
|LEDs||200 in a 25 x 8 array|
|Frequency Range||0...120.000 FPM (flashes per minute)|
|Power Required||24V DC (21.6….26.4VDC) / 1.4A (33.6 Watts)|
Universal AC power supply sold separately, pn LS-AC-WORLD-90VA
|External Trigger Input||3...30 V / max. 5 mA|
DIN 41524 5-pin standard plug
Uout = Uin, max. 200 mA
switchable trigger input
|Trigger Output||for connection to 2nd Strobe (Slave)|
|Illumination Intensity||9,000 Lux (at 12"/30cm)|
|Light intensity/sharpness||Adjustable with turning knob|
|Illumination intensity single flash||1.2 Mega-Lux / 12" / 30cm|
|Illumination area||12 x >20" (30 x >50cm)|
|Flash color||5000...8.300 K, approx.|
|Dimensions||440 x 130 x 112 mm / 17.3 x 5.1 x 4.4|
|Ambient temperature||0°...40°C (32°...114°F)|
|Storage temperature||-25°C...70°C (-10°...125°F)|
|Humidity||max. 95% not condensing|
|Mounting Holes||Located on underside of housing:|
(1) 1/4 - 20UNC in center
(2) M5 Threaded Inserts (60 mm c:c) outer
|Manual Test Trigger||Pin1 (+24V)|
Jump Pin1 to Pin4
Momentarily Jump Pin3 to Pin5
18 Inch LED Inspection Stroboscope, Requires 24V power (Not included) A6-7200 / RT 7000 LED
24V Power Supply for LS-18-LED & LS-9-12000 Strobes, 100-265VAC.
Flash Control Module for manual adjustment of flash rate, A6-1050
Remote Control Unit and connection cable
Articulating Arm for LS-LED and LS-XENON Strobe Lights including models
Connection cable to transfer both POWER and TRIGGRER from Primary to Slave Strobe, 5 ft length
Extension Cable for LS Strobes, 2 meter with 5-pin MALE/5-pin FEMALE DIN Connectors
Extension Cable for LS Strobes, 5 meter with 5-pin MALE/5-pin FEMALE DIN Connectors - Please contact us for pricing and availability.
Sensor for Triggering Stroboscopes On Label Gaps
5-pin DIN Connector for use with all LS-Strobes and LS-SCU Strobe Controller
Sensor for Triggering Stroboscopes On Registration Marks
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.