Web Orders Over $100 Ship Free. Enter Promo Code "SHIPFREE" for free UPS Ground Shipping at Checkout. (USA Only)

LS-FCM Flash Control Module

Made in Germany
LS-FCM, A6-1050, RT STROBE eco control
Click images to enlarge.
When manual flash rate adjustment is needed, the LS-FCM offer a convenient low-cost solution to provide this capability. It simply plugs into one of the two connectors on the back side of the LS Xenon Strobe or LS LED Strobe, providing precise manual control of the flash rate for the user. The LS-FCM be installed at any time.

Max Flash Rate is 120,000 fpm (2000 Hz) when used with LED Strobes and 12,500 fpm (208 Hz) with Xenon Strobes.

Related Products

Stroboscope Control Unit - LS-SCU
Click image for more info
Stroboscope Remote Control
Inspection Stroboscope
Click image for more info
Inspection Stroboscope - Inspection Strobe Light
- Unmatched brightness, sharpness and uniformity from any strobe in its class
Click image for more info
Web Inspection Stroboscope
- Unmatched image brightness (2500 Lux) along with best sharpness and light uniformity from any strobe in its class
ls-5-led stroboscope
Click image for more info
LED Inspection Strobe Light
80 LEDs in 10 x 8 array
- Extremely bright and uniform light distribution for web widths up to 12" (300mm) and wider.
LS-9-LED
Click image for more info
LED Inspection Stroboscope
120 LEDs in 15 x 8 array
- Extremely bright and uniform light distribution over an area of 300 x 500mm (12" x 20")
- Uses 120 of the newest generation LEDs in a 15 x 8 array providing 7500 Lux, peak
ls-18-led stroboscope
Click image for more info
LED Inspection Stroboscope
200 LEDs in 25 x 8 array
- Light intensity of 9000 Lux peak from 200 LEDs
LED Fixed-Mount Inspection Stroboscope - 480 LEDs

LS-FCM Operating Instructions


This control unit is designed for use with the LS Strobe series. With this control unit you can manually adjust the flash frequency of the stroboscope.

Warning: Please read all warnings as detailed in the instruction manual of the stroboscope.

How to use:

1. Plug the LS-FCM into either one of the (2) jacks on the backside of the Strobe and tighten the screw.

2. To adjust the frequency, rotate the knob CCW (Counter Clockwise, left) to DECREASE flash frequency or CW (Clockwise, right) to INCREASE flash frequency

(The rate of change will increase as you rotate the knob faster)

Buy Now

Item Description Price
Flash Control Module for manual adjustment of flash rate, A6-1050
$129.00
Accessories
LS-CABLE-EXT
Extension Cable for LS Strobes, 2 meter with 5-pin MALE/5-pin FEMALE DIN Connectors
$75.00
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable