Web Orders Over $100 Ship Free. Enter Promo Code "SHIPFREE" for free UPS Ground Shipping at Checkout. (USA Only)

TI-25MX-WOP Ultrasonic Wall Thickness Gauge Complete Kit WITHOUT PROBE

Made in USA
Ultrasonic Wall Thickness Gauge - TI-25MX
Click images to enlarge.
Total Measuring Range (depends on material and transducer/probe type)
0.025 - 36.000 inches
0.63 - 914.4 mm

Measuring Range on Steel (with standard T-102-3300 probe)
0.025 - 6.00 inches
0.60 - 150.0 mm

The Check-Line TI-25MX Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! It can measure thickness up to 36 inches (915 mm), depending upon the material and transducer. The TI-25MX combines the best features of the TI-25SX allowing the operator to select from 8 preset materials as well as program 2 custom material velocities. The preset materials are as follows:

  • 1. Steel 4340
  • 2. Stainless 303
  • 3. Aluminum 2024
  • 4. Cast Iron
  • 5. Plexiglass
  • 6. PVC
  • 7. Polystyrene
  • 8. Polyurethane
  • 9. Custom1
  • 10. Custom2

Additionally, the user can adjustment of the velocity as desired and calibrate to a sample of known thickness ---- the optimal acoustic velocity is automatically calculated. In special circumstances, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The calibration and other setup parameters can be locked to prevent any accidental adjustments.

The calibration can be locked to prevent any accidental adjustments.

The TI-25MX can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

The TI-25MX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions.

TI-25MX Basic Use Video

Features

  • Includes NIST Traceable Calibration Certificate
  • Resolution of 0.001 inch (0.01 mm)
  • Switch-selected units for inches or mm
  • User-selected Manual or Auto Zero of Transducer
  • User can select from 8 preset materials as well as program 2 custom material velocities
  • Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity
  • 2-Point Calibration to optimize linearity over a wide measurement range, automatically calculates the optimal acoustic velocity
  • Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed
  • Adjustable GAIN in 5 steps to fine tune the gauge for use on challenging materials or applications
  • Special-purpose probes are offered for a variety of applications (1 to 10 MHz)
  • The extruded aluminum housing is impact-resistant and environmentally sealed (IP 65)
    to provide trouble-free operation under the toughest field conditions
  • For underwater surveying, an optional 50 ft (15 meter) underwater probe/cable is available
  • High visibility LCD Display is readable in all lighting conditions and temps as low as 22 °F (-30 °C)
  • LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units
  • Operates on two (2) AA Batteries - 45 hours continuous operation
  • Selectable Backlight ON/OFF/AUTO
  • CE-Certified
  • Warranty: Gauge: 5 Years Probes: 90 Days
  • Made in USA

Complete Kit

The TI-25MX is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

Measuring Limits

Minimum Radius for Convex Surfaces 0.350" (8.89 mm)
Minimum Radius for Concave Surfaces 3" (76.2 mm)
Minimum Headroom 1" (25.0 mm)
Minimum Sample Diameter 0.150" (3.8 mm)
Minimum Substrate Thickness - F na
Minimum Substrate Thickness - NFe na

Related Products

Protective Rubber Boot for TI / ZX Series Small Body Ultrasonic Thickness Gauges
Click image for more info
Protective Rubber Boot for TI / ZX Series Small Body Ultrasonic Thickness Gauges
- Built-in Stand
- Hand and Shoulder Straps
CF12 Sound Safe Ultrasonic Couplant
Click image for more info
Coupling Fluid
- Temp Range: 0 - 200 °F, -18 - 93 °C
Certified Steel Test Blocks
Click image for more info
Certified Steel Test Blocks
- Includes NIST Traceable Calibration Certificate
- Precision Machined and Finished
- Includes PLASTIC Storage Box
SB4 & SB6 Uncertified Steel Test Blocks
Click image for more info
Ultrasonic Test Blocks without certification
- Fabricated from 1018 Steel or 304 Stainless Steel
- ISO Calibration OPTIONAL
Click image for more info
50 Foot Underwater Probe / Cable Assembly
- 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors.
ultrasonic trandsducer holder v-block
Click image for more info
Ultrasonic Transducer Holder
Ultrasonic Wall Thickness Gauge - TI-25MXT
Click image for more info
Thru-Paint Ultrasonic Wall Thickness Gauge

Specifications

Total Measuring Range
(Steel)
0.025 - 36.000 inches
0.63 - 914.4 mm
(depends on material and transducer/probe type)
Measuring Range
(Steel)
0.025-6.000 inches
0.60-150.0 mm
(with standard transducer T-102-3300)
Resolution0.001 inch (0.01 mm)
Measuring ModePulse-Echo (P-E)
Velocity Range0.0120 to .7300 in/μs. 305 to 18,542 meters/sec
GAIN AdjustmentAdjustable GAIN 5-position (VLOW, LOW, MED, HIGH, VHI), in 3dB steps, 40-52dB
Probe (Standard)1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-3300 (4 ft cable)
Probes (optional)1 to 10 MHz, 3/16" up to 1 inch (custom probes available)
Probe WearfacePEEK (Polyethylethylkytone)
Cable1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors
LCD DisplayMulti-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes
Display BacklightBacklight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options
Display Update Rate10 Hz (10 updates/sec)
Scan Mode100 Hz (100 updates/sec), Displays the lowest reading found during a scan
Temp. LimitsAmbient: -30 to 75° C (-22 to 167° F)
Material: -20 to 100° C (0 to 200° F)
High temperature probes available
Battery Type2x AA batteries (rechargeable batteries can be used)
Battery Life45 hours continuous use
Weight308 grams (11 ounces)
Dimensions64 x 131 x 32 mm (2.5" x 5.17" x 1.25")
AccessoriesProbe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
HousingExtruded aluminum body with nickel-plated aluminum end caps (gasket sealed)
Housing RatingIP65
CertificationsNIST Traceable and MIL-STD-45662A
KeypadSealed membrane that is resistant to both water and petroleum products
Seven or eight tactile-feedback keys
Pulse Repetition Frequency (PRF)200 Hz (200 pulses/sec)
To Lock SettingsWith gauge powered off, press and hold the "+" key while powering on the gauge
The LOCK icon will be illuminated on the Display
To unLock SettingsWith gauge powered off, press and hold the "-" key while powering on the gauge
The LOCK icon will turn off
WarrantyGauge: 5 Years
Probes: 90 Days
Java Demo LinkTI-25MX Demo App (Requires Java Desktop Software)

Downloads

Buy Now

Item Description Price
TI-25MX-WOP
Ultrasonic Wall Thickness Gauge Complete Kit WITHOUT PROBE
$1,405.00
Accessories
1/4" diameter, 7.5 MHz, dual element transducer (Standard Probe for TI-25MX)
$355.00
Protective Rubber Boot for TI / ZX Series Small Body Ultrasonic Thickness Gauges
$95.00
4 Step Steel Test Block, 0.1 / 0.2 / 0.4 / 0.6 inch - Uncertified, supplied in plastic case
$125.00
V-Block Transducer Holder (For 3/16" & 1/4" Transducers only), F-000-7001
$170.00
SoundSafe Coupling Fluid - 12 oz / 354 ml - NSN: 6635-01-553-0559
$30.00
BATT-RC4AA-WC
4-pack AA Ni-MH Rechargeable Batteries & Charger Kit
$35.00
Alternate Probes/Transducers for Special-purpose Applications (4 ft cable unless otherwide noted)
1/4" diameter, 5.0 MHz, dual element transducer, Side In, Potted
$320.00
1/4" diameter, 10.0 MHz, dual element transducer, Side in, Potted
$350.00
1/4" diameter, 2.25 MHz, dual element transducer, Side In, Potted
$320.00
1/2" diameter, 2.25 MHz dual element transducer, Side In, Potted
$330.00
1/2" diameter, 5.0 MHz dual element transducer, Side In, Potted
$330.00
1/2" diameter, 1.00 MHz dual element transducer, Side In, Potted
$330.00
3/16" diameter, 5.0 MHz dual element transducer with extended contact area
$395.00
1/4" diameter, 5.0 MHz dual element transducer, High Temp 650°F / 343°C Top in, Potted
$375.00
1/2" diameter 5.0 MHz dual element transducer Hi-Temp (650 F/344 C), Side in, Microdot
$405.00
1/4" diameter, 5.0 MHz dual element transducer Hi-Temp (900 F/500 C) Top in, Microdot
$470.00
10 foot Dual Lemo Extension Cable for UT Gauges
$195.00
TI-EXT-20
20 foot Dual Lemo Extension Cable for UT Gauges
$275.00
25 foot Dual Lemo Extension Cable for UT Gauges
$295.00
50 foot Dual Lemo Extension Cable for UT Gauges
$365.00
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable