Web Orders Over $100 Ship Free. Enter Promo Code "SHIPFREE" for free UPS Ground Shipping at Checkout. (USA Only)

F755-IM Test frame with IntelliMESUR software, single license, vertical, 750 lbF / 3.4 kN

Made in USA
Mark-10 Series F
Click images to enlarge.
Load Cell and Grips Sold Separately

Series F force test systems are designed for tension and compression force testing applications, with force capacities up to 1,500 lbF (6.7 kN). Select from a broad range of force sensor capacities and an expansive array of grips and fixtures.

Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.

Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.

Stepper motors and controllers drive a ball screw and linear guideway for smooth, quiet operation, with virtually no speed variation under load.

IntelliMESUR

IntelliMESURIntelliMESUR® software is an integrated solution running on Windows tablets and PCs. Select a pre-loaded 10.1” tablet with mounting bracket or use your own Windows device. With IntelliMESUR®, you can create and run a wide range of basic and multi-step tests, including:

  • Limit testing to a load, break, or distance
  • Height measurement
  • Load holding
  • Cycle testing
  • Multi-step testing, utilizing any combination of the above functions
Run individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report.


Run a test via the Graph or Results views, and switch views as needed. Pass / Fail indicator easily identifies problematic samples. Individual runs may be invalidated if, for example, the sample slips out of the grips, or the test was interrupted.

IntelliMESUR results



From IntelliMESUR®’s home screen, quickly access up to 10 favorite tests. Associate an image with each favorite for easy identification.

Basic tests - Select a test type, and IntelliMESUR® will guide you through the setup.

  • Load Limit
  • Distance Limit
  • Break Limit
  • Load Hold
  • Cycle
Multi-step tests - Building upon basic test wizards, easily incorporate any combination of steps, with the ability to loop a sequence of steps. Select from:

  • Move to load
  • Move to distance
  • Move to break
  • Hold a load or position
  • Hold a load or position
  • Loop / cycle
  • Datum
  • Prompts
  • Save current load or position
  • Zero load or position
  • Return to Home position


Multi-step tests

Specifications & Ranges

F755 F755S F1505 F1505S
Load capacity1: 750 lbF
[3.4 kN]
1,500 lbF
[6.7 kN]
Maximum travel: 32.0 in
[813 mm]
14.2 in
[360 mm]
32 in
[813 mm]
14.2 in
[360 mm]
Speed range: 0.001 - 60 in/min
[0.02 - 1,525 mm/min]
0.001 - 70 in/min
[0.02 - 1,800 mm/min]
Load accuracy
(% of full scale)
  • Test frame + force sensor, calibrated together: ±0.1%
  • Test frame alone: ±0.1%
  • Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%
Speed setting accuracy: ±0.2%
Load sampling rate: 20,000 Hz
Data acquisition rate: 1,000 Hz
Speed accuracy: ±0%, stepper motor driven
Distance accuracy: ±0.002 in [0.05 mm], factory-compensated at up to full load
Distance resolution: 0.0005 in [0.01 mm]
Limit switch repeatability: ±0.001 in
[0.03 mm]
Overload protection: Motor stops at 120% of full scale of the force sensor
Power: Universal input 100-240 VAC, 50/60 Hz, 300W Universal input 100-240 VAC, 50/60 Hz, 450W
Fuse type: 4A, 3AG, SLO BLO
Weight (test frame only): 184 lb
[83 kg]
149 lb
[68 kg]
197 lb
[89 kg]
157 lb
[71 kg]
Shipping weight: 235 lb
[107 kg]
195 lb
[88 kg]
247 lb
[112 kg]
205 lb
[93 kg]
Environmental conditions:
  • Indoor use only
  • Up to 6,500 ft [2,000 m] above sea level
  • Temperature range: 40 - 95°F [5 - 35°C]
  • Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing
  • Mains supply voltage fluctuations up to ±10 % of the nominal voltage
  • Transient overvoltages up to the levels of Overvoltage Category II
  • Use in environments up to Pollution Degree 2
Warranty: 3 years [see individual statement for further details]
Conformance: CE

1. Load capacity is reduced at higher speeds, as follows:
- F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min
- F1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min

2. May be extended via single- or double-column extensions.

Series F Videos

Related Products

Series FS05 Sensor
Click image for more info
Tension and Compression Force Sensors
- Mount directly to crosshead of models F105, F305, F505, and F505H without any connection cables
FS06 force sensor
Click image for more info
Force Sensors for F105, F305, F505, and F505H test frames
- Compatible with Model F105, F305, F505, and F505H test frames
S-Beam Force Sensor - R07
Click image for more info
R07
S-Beam Force Sensor
- Compatible with Models F755, F755S, F1505, and F1505S test frames
AC1095 column extension
Click image for more info
Double column extensions for Motorized Test Stands
Materials Testing Calculations
Click image for more info
Characterize and analyze the behavior of materials, components, and assemblies
Click image for more info
Safety Shields for Motorized Test Frames and Test Stands

Downloads

Buy Now

Item Description Price
F755-IM
Test frame with IntelliMESUR software, single license, vertical, 750 lbF / 3.4 kN
$13,300.00
Accessories
NIST-traceable certificate of calibration, distance and speed
$395.00
Safety Shield For Test Frames, 51.9" height
$3,619.50
Safety Shield For Test Frames, 34.4" height
$2,669.50
AC1093
USB hub for Series F
$295.00
AC1085
Control panel tabletop mounting kit
$200.00
DC6000
Replacement tablet control panel, Series F, pre-installed w/IntelliMESUR®, w/test frame mounting hardware
$9,100.00
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable