Orders Over $100 Ship Free. Enter Promo Code "SHIPFREE" for free UPS Ground Shipping at Checkout. (USA Only)

LS-5-LED LED Inspection Strobe Light
80 LEDs in 10 x 8 array

Made in Germany
ls-5-led stroboscope
Click images to enlarge.
The LS-5-LED is a high-performance LED stroboscope. It produces a bright and sharp image and uniform light distribution for web widths up to 12" (300mm) and wider.

High light Output: 80 high-performance LEDs provide powerful light intensity. The large, homogenous illumination surface delivers superb results in difficult light conditions, making the LS-5-LED suitable for a wide range of measurement, observation and inspection functions, especially for demanding applications, such as those in the printing industry.

Superb image sharpness: Adjustable flash duration from 1 to 1000 micro seconds, allows you to easily find the best combination between light intensity and sharp images for every application.

Flexible adjustments for all applications: Alternatively, the stroboscope can be controlled directly by the trigger signal of your system without the need for additional control units or by various strobe control devices. When using these trigger options simultaneously, you can easily alternate between the signal inputs.

Additional control options: LS-FCM: A simple, inexpensive device for controlling fl ash frequency. Simply insert the controller into one of the sockets on the reverse side of the device.

LS-SCU: For adjusting the fl ash frequency, phase shift, delay time and trigger divider. This unit is connected to the stroboscope by cable and provides the convenience of remote control even if the stroboscope within your machine is difficult to access.

Features

  • Light intensity of 6000 Lux peak
  • Extremely bright and uniform light distribution for web widths up to 12" (300mm) and wider.
  • Connections include two trigger inputs and one trigger output. Power can be connected in either of these three locations.
  • LEDs provide lifetime use and never require replacement.
  • Requires 24V DC Power (Not Included), An optional power adapter is available.
  • For web widths greater than 12" (300mm), two or more strobes can be connected in parallel.

Light Output (LUX) vs Distance

Overview of LED Strobe Models

Model LEDs Array Size Brightness (peak) Housing Width Price (US$)
LS-3-LED 40 10 x 4 5000 Lux 150 mm
(6 inch)
795
LS-5-LED 80 10 x 8 6000 Lux 150 mm
(6 inch)
1295
LS-9-LED 120 15 x 8 7500 Lux 230 mm
(9 inch)
1995
LS-9-LED-WB 120 5 x 8 (3x) 7500 Lux 440 mm
(17 inch)
2395
LS-18-LED 200 25 x 8 9000 Lux 440 mm
(17 inch)
2995
LS-36-LED 480 60 x 8 14000 Lux 948 mm
(37 inch)
5495

Specifications

LEDs80 in a 10 x 8 array
Frequency Range0...120000 FPM (flashes per minute)
Power Required24V DC (21.6….26.4VDC) / 0.6A (14.4 Watts)
Universal AC power supply sold separately, pn LS-AC-WORLD
External Trigger Input3...30 V / max. 5 mA
Potential-free optocoupler
DIN 41524 5-pin standard plug
Uout = Uin, max. 200 mA
switchable trigger input
Trigger Outputfor connection to 2nd Strobe (Slave)
Illumination Intensity6,000 Lux / 12" / 30cm
Light intensity/sharpnessAdjustable with turning knob
Illumination intensity single flash1.2 Mega-Lux / 12" / 30cm
Illumination area12 x >20" (30 x >50cm)
Flash colorca. 5000...8.300 K
MaterialAluminum
Dimensions6.0" x 5.1" x 4.4" (150 x 130 x 112mm)
Weight2.09 lbs
Ambient temperature0°...40°C (32°...114°F)
Storage temperature-25°C...70°C (-10°...125°F)
Humiditymax. 95% not condensing
CertificationsCertificate of CE conformity
Warranty1 Year
Mounting HolesLocated on underside of housing:
(1) 1/4 - 20UNC in center
(2) M5 Threaded Inserts (60 mm c:c) outer
Manual Test TriggerPin1 (+24V)
Pin3 (0V)
Jump Pin1 to Pin4
Momentarily Jump Pin3 to Pin5

Downloads

Related Products

SAS-DT300 Articulating Stroboscope Swing Arm
Click image for more info
Articulating Stroboscope Swing Arm
LS-FCM, A6-1050, RT STROBE eco control
Click image for more info
Flash Control Module
Stroboscope Control Unit - LS-SCU
Click image for more info
Remote Control Unit
Label Sensor for Triggering On Label Gaps - LS-GAPSENSOR
Click image for more info
Label Sensor for Triggering On Label Gaps
- Only label sensor on the market that is immune to the interference caused by a strobe.
registration mark sensor
Click image for more info
Registration Mark Sensor
- Color Mark registration detection on transparent and translucent, including many metalized films and paper
Click image for more info
Reflective Sensor
LS-ARM Stroboscope Mounting Arm, Articulating Swing Arm
Click image for more info
Stroboscope Mounting Arm, Articulating Swing Arm

Buy Now

Item Description Price
5 Inch LED Inspection Stroboscope, Requires 24V power (Not included) A6-3200 / RT 3000 LED
$1,295.00
Accessories
LS-AC-WORLD
24V Power Supply for use with LS Linear Strobes or LS-SCU, 100-265V AC. NOT REQUIRED IF 24V DC AVAILABLE
$99.00
Flash Control Module for manual adjustment of flash rate, A6-1050
$129.00
Articulating Swing Arm for Stroboscopes
$215.00
Remote Control Unit and connection cable
$355.00
LS-CABLE-PT
Connection cable to transfer both POWER and TRIGGRER from Primary to Slave Strobe, 5 ft length
$75.00
LS-CABLE-EXT
Extension Cable for LS Strobes, 2 meter with 5-pin MALE/5-pin FEMALE DIN Connectors
$75.00
LS-CABLE-EXT-5M
Extension Cable for LS Strobes, 5 meter with 5-pin MALE/5-pin FEMALE DIN Connectors
$95.00
Label Sensor for Triggering On Label Gaps
$125.00
LS-REGSENSOR Registration Mark Sensor
$149.00
LS-DIN
5-pin DIN Connector for use with all LS-Strobes and LS-SCU Strobe Controller
$10.00
Tripod for Tachometers and Stroboscopes
$35.00
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable