The new Check-Line RX-DD is a precision Digital Durometer ideal for laboratory use. It features a large direct drive LCD display, RS232 data ports for computer compatibility, a locking feature to prevent accidental erasure of tolerances, automatic shutoff, low battery warning, and accessories such as MTI and SPC type printers, audio attachments and software.
Type M Durometers require test stand OS-3 per ASTM D2240.
- Includes NIST-Traceable Calibration Certificate
- High and low buttons for setting tolerance limits
- One year warranty
- Holds Peak reading until reset
- 0.1 Unit Resolution
- Supplied in custom fit carrying case
- Conforms to ASTM D-2240
- Optional Removable Stainless Steel Barrel for Medical and Food Applications
Minimum Sample Thickness-Type A = 6.00 mm (0.250")
Minimum Sample Thickness-Type M = 1.25 mm (0.050")
Our P-190 Printer with the G03-0086 Cable will allow you to print each reading as it's shown on the display. The user simply depresses the thumb switch each time they want a value transferred to the printer. Simple yet effective!
The battery-powered P-190 Printer uses standard rolls of adding machine paper, unlike thermal printers the printout will not fade over time. It is supplied with a battery charger for operation on all power worldwide.
Order the following items as shown in the accessories section of the BUY NOW section at the bottom of this page.
G03-0086 Data Transfer Cable and Thumb Switch
|Measruing Range||0 - 100 Units|
|Accuracy*||±1 durometer unit (A,B,C,D,E,O,DO) |
±2 durometer units (OO,OOO)
±4 durometer units (M)
|Tolerance||± 0.5 at "100" and -0 +1 at "0"|
|Dimensions||2.25" x 6.125"|
|Power Supply||(2) 3V CR-2450 Batteries|
115V AC Adapter Included. 230V AC Adapter Optional
|* Note||per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted.|
|RS232 Output||9600 baud, no parity, 8 data bits, 1 stop bit (requires external power)|
The DD-DB1 "Smart" USB cable connects the durometer to a computer. The output of the SmartCable Keyboard is a standard USB 2.0 keyboard signal. Connecting the SmartCable Keyboard with its built-in keyboard wedge to a computer will allow the SmartCable to be identified as a keyboard device that can send data to any Microsoft Windows application - no software wedge required. The SmartCable Keyboard will make the gauge readings appear as if they were typed in using a standard keyboard - eliminates data collection errors. If you want to collect data into a Microsoft Excel spreadsheet, simply select the cell where you want the data to appear.
Type OO Digital Durometer for Light foams, sponge rubber gels and animal tissue (DD-4-OO)
Constant Load Weight for Asker C Durometer with pencil type barrel, Tapered Design, NB Spec
115V AC Adapter for RX-DD / DD-100 / MTG
220V AC Adapter for RX-DD / DD-100 / MTG
Upgrade to Removable Stainless Steel Barrel for Medical and Food Applications
(Must be specified at time of order, not suitable for use with RX-1600-M or RX-1600-OOO-S)
"Smart" USB Data Transfer Cable, Sends data to any Windows program with press of a button
USB Data Transfer Cable from DD-100 or RX-DD Digital Durometers to a PC for transfer to a Wedge or Data Collection program purchased from a 3rd party
Oversized Carrying Case for Durometer with Constant Load Weight Attached
Rectangular Footer for Durometers with 1/2" Diameter Barrel, 41 x 19 mm
ISO-17025 Calibration & Certification for Durometers
Battery-Powered Portable Serial RS-232 Impact Printer supplied with AC-Adapter/Charger
|Portable Battery-Powered Printer|
RS-232 Data Output Cable for MTG / DD-4 / DD-5 / DD-100