The new Check-Line RX-DD is a precision Digital Durometer ideal for laboratory use. It features a large direct drive LCD display, RS232 data ports for computer compatibility, a locking feature to prevent accidental erasure of tolerances, automatic shutoff, low battery warning, and accessories such as MTI and SPC type printers, audio attachments and software.
Type M Durometers require test stand OS-3 per ASTM D2240.
- Includes NIST-Traceable Calibration Certificate
- High and low buttons for setting tolerance limits
- One year warranty
- Holds Peak reading until reset
- 0.1 Unit Resolution
- Supplied in custom fit carrying case
- Conforms to ASTM D-2240
- Optional Removable Stainless Steel Barrel for Medical and Food Applications
Minimum Sample Thickness-Type A = 6.00 mm (0.250")
Minimum Sample Thickness-Type M = 1.25 mm (0.050")
Our P-190 Printer with the G03-0086 Cable will allow you to print each reading as it's shown on the display. The user simply depresses the thumb switch each time they want a value transferred to the printer. Simple yet effective!
The battery-powered P-190 Printer uses standard rolls of adding machine paper, unlike thermal printers the printout will not fade over time. It is supplied with a battery charger for operation on all power worldwide.
Order the following items as shown in the accessories section of the BUY NOW section at the bottom of this page.
G03-0086 Data Transfer Cable and Thumb Switch
|Measruing Range||0 - 100 Units|
|Accuracy*||±1 durometer unit (A,B,C,D,E,O,DO) |
±2 durometer units (OO,OOO)
±4 durometer units (M)
|Tolerance||± 0.5 at "100" and -0 +1 at "0"|
|Dimensions||2.25" x 6.125"|
|Power Supply||(2) 3V CR-2450 Batteries|
115V AC Adapter Included. 230V AC Adapter Optional
|* Note||per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted.|
|RS232 Output||9600 baud, no parity, 8 data bits, 1 stop bit (requires external power)|
The DD-DB1 "Smart" USB cable connects the durometer to a computer. The output of the SmartCable Keyboard is a standard USB 2.0 keyboard signal. Connecting the SmartCable Keyboard with its built-in keyboard wedge to a computer will allow the SmartCable to be identified as a keyboard device that can send data to any Microsoft Windows application - no software wedge required. The SmartCable Keyboard will make the gauge readings appear as if they were typed in using a standard keyboard - eliminates data collection errors. If you want to collect data into a Microsoft Excel spreadsheet, simply select the cell where you want the data to appear.
Type A Digital Durometer for Soft rubber, plastics and elastomers (DD-4-A)
Constant Load Weight for Asker C Durometer with pencil type barrel, Tapered Design, NB Spec
Upgrade to Removable Stainless Steel Barrel for Medical and Food Applications
(Must be specified at time of order, not suitable for use with RX-1600-M or RX-1600-OOO-S)
Smart USB Data Transfer Cable, Sends data to any Windows program with press of a button - 600-11-KB-USB
USB Data Transfer Cable from DD-100 or RX-DD Digital Durometers to a PC for transfer to a Wedge or Data Collection program purchased from a 3rd party
USB Data Output Cable with "send button", 12 ft length (3.6 meters)
Oversized Carrying Case for Durometer with Constant Load Weight Attached
Rectangular Footer for Durometers with 1/2" Diameter Barrel, 41 x 19 mm
ISO-17025 Calibration & Certification for Durometers
|Portable Battery-Powered Printer|
Battery-Powered Portable Serial RS-232 Impact Printer supplied with AC-Adapter/Charger
RS-232 Data Output Cable for MTG / DD-4 / DD-5 / DD-100