The HP textile durometer accurately measure the hardness / winding density of textile bobbins, beams, spools, spindles, cones, quills, dye packages, rolls, etc. The HP measure on a 0-100 scale used for comparison purposes. It doesn't not measure in a specific scale / unit. These Durometers use Shore A spring force with 2.5, 5 and 10mm diameter spherical indentor specifically designed for yarns, fibers, monofilaments and similar textiles. As the spherical indentors are unique for textile applications, these Durometers do not conform to ASTM D2240.
- Constant-pressure indicating system assures uniform test pressure eliminating false readings due to differences between operators
- Supplied in a foam-fitted carrying case.
- Operation is as easy as pressing the spring-loaded knurled aluminum shell down to the red line.
Less Than "15 Inch/380 mm" Yarn Package Diameter, use "regular" models (Concave bottom, i.e. HP-5)
Greater Than "15 Inch/380 mm" Yarn Package Diameter, use "F" models (Flat Bottom, i.e. HP-5F)
|HP-2.5||2.5 mm||Closely wound synthetic, hard finish fibers and filaments.|
|HP-2.5F||2.5 mm||Same as HP2.5, except with flat base for large yarn packages over 15" (380 mm) in diameter.|
|HP-5||5.0 mm||Average yarns, threads, fibers, etc., wound with moderate winding density.|
|HP-5F||5.0 mm||Same as HP5, except with flat base for large yarn packages over 15" (380 mm) in diameter.|
|HP-10||10.0 mm||Loosely wound spools of natural or synthetic yarns and fibers, bulky yarns.|
|HP-10F||10.0 mm||Same as HP10, except with flat base for large yarn packages over 15" (380 mm) in diameter.|
|Indenter:||Cone 35°, 1.3 mm ⌀|
|Depth of indentation:||0 - 2.5 mm|
|Test pressure||approx. 12.5 N|
|Measuring spring force||0.55 - 8.065 N|
|Display range||0 - 100 Scale|
|Scale diameter||56 mm|
|Weight, net (gross):||approx. 300 g (500 g)|
|Dimensions||50 x 50 x 110 mm (L x W x H)|
|Tolerance||± 0.5 at "100" and -0 +1 at "0"|
Textile Durometer with 5mm indenter and Curved Base
NIST Traceable Calibration Certificate
Memory Pointer Option for HP Durometer - K34010
Test Block for HP Textile Durometers with Flat Base, 2 blocks in fitted case
Test Block for Curved Base (Non F) Textile Durometers
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.