Web Orders Over $100 Ship Free. Enter Promo Code "SHIPFREE" for free UPS Ground Shipping at Checkout. (USA Only)

D-2005-Gi Precision Material Thickness Gauge for Rubber

D-2005 Motorized Precision Material Thickness Gauge
Click images to enlarge.
The D-2005 Motorized Precision Material Thickness Gauge has a stable and rigid base frame with an encapsulated, separate measuring block. And is a top choice if you appreciate high precision (up to 0.001 mm), easy operation, automatic processing and objective, reproducible measurement results.

The device can be adapted to the materials to be measured according to your requirements. Thus, the calliper surfaces, the calliper materials and the measurement pressures fit in exactly with the guidelines of ISO, EN, DIN or also with your own test regulations.

Common Standards
For textiles and non-woven textiles according to DIN EN ISO 5084 (measuring face 20 cm²/pressure 0.1 kPa and 1 kPa)

For fleece according to DIN EN ISO 9073-2 (measuring face 25 cm²/pressure 0.1 kPa and 0.5 kPa)

For geomaterials according to DIN EN ISO 964-1 (measuring face 25 cm²/pressure 2 kPa and 20 kPa, not 200 kPa)

The D-2005 device is also available with different measurement ranges:
Ranges 0 – 10 mm, 0 – 25 mm and 0 – 50 mm (or with the equivalents in inch, switchable).

With this instrument the most popular checking methods can be applied for textiles, felt, geomaterials, paper, floor coverings, leather, foils, rubber, plastic films etc.

This alternative to the D-2010 does not have an illuminated, menu controlled touch-screen with its statistics functions, instead it is equipped with a dial gauge with seven-segment display and individual keys. Of course, there is a data output for the digital processing of the measurement results.

The model D-2005 is also available with special equipment for calliper dwell time gauging range preselection.


  • Rigid housing frame
  • Separate measuring block, encased against outside external impacts, for highest accuracy and repeatability
  • Optional: Preselection of the measuring range
  • Optional: Adjustable dwell time
  • Footpedal included
  • Switch-selectable measuring units mm / inch
  • Optional: software for data transfer and analysis - Part No. SW-50
  • Motor-driven calliper movement
  • Seven-segment display
  • Resolution 0.01 mm - standard, 0.001 mm - optional
    (0.001 mm is standard for D-2005-P, D-2005-F)

Available Models

ModelStandardApplicationFeeler dia.Feeler areaPressure
D-2005-TDIN EN ISO 5084Textiles50.42 mm20 cm20.1 kPa and 1 kPa
D-2005-VDIN EN ISO 9073-2Standard fleece56.42 mm25 cm20.1 kPa and 0.5 kPa
D-2005-G1DIN EN ISO 964-1Geomaterials56.42 mm25 cm22 kPa
D-2005-NWDIN EN ISO 53855Non-woven textiles56.42 mm
35.68 mm
25 cm2
10 cm2
0.5 kPa and 1 kPa
5 kPa
D-2005-P*DIN EN ISO 53105Paper16 mm2 cm2100 kPa
D-2005-HYDIN EN ISO 54540Hygenic Paper56.42 mm25 cm22 kPa
D-2005-L1DIN EN ISO 53326
(out of date)
Leather10 mm0.785 cm250 kPa
D-2005-L2DIN EN ISO 2589Leather10 mm0.785 cm249.1 kPa
D-2005-GiRubber35.68 mm10 cm25 kPa
Feeler Calotte
D-2005-F*DIN 53370FoilsR 30 mm0.5 N
* 0.001 mm resolution is standard for D-2005-P, D-2005-F


Code RHigher resolution 0.001 instead of 0.01 mm
(0.001 mm is standard for D-2005-P, D-2005-F)
Code EExtended measuring range 0 - 25 mm
Code E2 Extended measuring range 0 - 50 mm
Code DAdjustable dwell time
Code D2Adjustable dwell time & measurement range
Code PExternal power supply of the display
DKD-CalCalibration report from a DKD authorized laboratory
Code S Software & Cable

D-2000 Series Comparison Chart

Touch screen with menu control in English or German - -
Seven-segment display - -
Display illumination - -
Statistics display - -
Automatic zero point control - -
Preselection of the measurment cycles - -
Preselection of the measuring range - optional
Adjustable dwell time - optional
Motor-driven caliper movement -
Connection for pedal -
Manual caliper movement via a control lever - - -
Automatic material infeed, adjustable - - -
Digital interface
Available scale divisions 0.001 mm, 0.01 mm
Possible measuring ranges 0 - 10 mm, 0 - 25 mm, 0 - 50 mm
LxWxH (for 0 - 10 mm range) 300 x 240 x 300 mm 300 x 210 x 300 mm 300 x 200 x 300 mm 300 x 300 x 320 mm
Weight (for 0 - 10 mm range) 22.5 kg 23.0 kg 24.0 kg 31.5 kg


Measuring Range0 - 10 mm, (25 mm optional, Code E)
Resolution0.001 mm
Accuracy± 0.002 mm
Depth of jaw160 mm
Measuring systemCapazitive -> Sylvac
DisplayLCD 6 digit, 8.5 mm high
Measuring unitmm or inch
Preselection of the measuring rangeOptional
Feeler shape and surface pressureAccording international standards DIN, EN and ISO
Adjustable dwell timeOptional
Output signalRS 232 for printer and USB for PC
Temperature range10 - 45 °C
Air humidityMax. 85 % r.H
Dimensions300 x 210 x 300 mm (LxWxH)
Weight, net (gross)23 kg

Request Quote

Please complete the reCAPTCHA to verify that you are a Human.
Please enable javascript in order to submit this form.

Thank You

Thank you for your quote request, we will contact you within 1-2 business days.

There was an error submiting the form. Please try again.