Web Orders Over $100 Ship Free. Enter Promo Code "SHIPFREE" for free UPS Ground Shipping at Checkout. (USA Only)

MX2-275 Motorized Test Stand, 275lbs

Made in Japan
Click images to enlarge.
Capacities Available
MX2-110 - 110 lbs / 50 Kg / 500 N
MX2-275 - 275 lbs / 125 Kg / 1250 N
MX2-550 - 550 lbs / 250 Kg / 2500 N
MX2-1100 - 1100 lbs / 00 Kg / 5000 N

High Performance, Force Control, Motorized Test Stand with Speed Control, Timer & Cycle Counter

MX2 Vertical Motorized Test Stands use maintenance-free, brushless, DC motors that provide smooth and powerful operation to ensure consistent force testing results.

FA High Precision Distance Measuring Option records distance traveled directly on the ZTA force gauge for high speed Force VS Distance measuring.

Precise Increment Mode
MX2 features a unique jog movement control, for precise increment testing. In jog mode, each click of the program dial moves the cross head approximately .015mm for MX2-110, .01mm for MX2-275 and .05mm for MX2-550 (standard speed, under no load).

Cycle Mode
MX2 Program dial and LCD interface In cycle mode, automated fatigue tests are easy to setup. Press the unique program dial and turn, to make selections from the menu screens and set mode, speed, test duration, units and cycles. Control start and return speeds independently.

Force Control
Force controlled non-destructive tests are also easy to setup and program. Connect a Z Series force gauge to the MX2 test stand to enable the following force controlled tests and Conditional Overload Prevention.

Maintain Force Between High/Low Setpoints
Initial cross head speed is controlled by the start speed setting. Force control activates when applied force exceeds the low setpoint (and below the high setpoint) on the Z Series force gauge. The cross head maintains that force for the programmed interval and then uses return speed to reset for the next cycle.

Increase Force to High Setpoint and Stop
Initial cross head speed is controlled by the start speed setting. When the applied force reaches the low set point of the Z Series force gauge, the test stand engages the measuring speed setting and stops when the applied force reaches the high set point on the Z series force gauge. Ideal for non-destructive or creep testing. The cycle is repeated until the counter limit is reached.

Features

  • Ultra rigid, .5mm deflection at maximum load
  • Manual, Increment, Single Cycle, Continuous Cycle and Force Control (with Z Series gauges) selectable
  • Easy-to-use program dial and menu screens control mode, speed, timer and cycles
  • Programmable timer up to 99' 59.9 sec in 0.1 sec increments
  • One stand for both compression (push) and tension (pull) tests
  • Wide speed range: 0.4 – 11.8 in/min (optional speed ranges available)
  • Force Controlled operation with Imada Z Series force gauges
  • Optional digital distance meter available
  • Conditional Overload Prevention
  • Max clearance 9" (with extender 14")

Related Products

zts / zta force gauge
Click image for more info
ZTA
Digital Force Gauge with high speed data output, up to 2000hz
- 30,000 data/sec ultra-high sampling rate; Processes and transmits 2,000 data/sec.
ESM303 Motorized Test Stand
Click image for more info
High Performance Motorized Test Stand, 300lb Capacity
- Adjustable Travel Speed, Standard - 0.5 - 13 in/min (13 - 330 mm/min), Optional - 0.02 - 45 in/min (0.5 - 1,100 mm/min)
- USB output of force vs. time or force vs. travel (with optional travel measurement)

Speed Ranges

Model Speed Range
MX2-110 0.4 – 11.8 in/min (10 - 300 mm/min)
MX2-110-V600 0.8 - 23.5 in/min (20 - 600 mm/min)
MX2-110-V90 0.1 - 3.5 in/min (3 - 90 mm/min)
MX2-275 0.4 – 11.8 in/min (10 - 300 mm/min)
MX2-275-V600 0.8 - 23.5 in/min (20 - 600 mm/min)
MX2-275-V75 0.1 - 2.9 in/min (3 - 75 mm/min)
MX2-550 0.4 - 12 in/min (10 - 305 mm/min)
MX2-550-V75 0.1 - 3.5 in/min (3 - 75 mm/min)
MX2-1100 0.02 - 12 in/min (0.5 - 300 mm/min)

Specifications

CapacityMX2-110: 110 lbs / 50 Kg / 500 N
MX2-275: 275 lbs / 125 Kg / 1250 N
MX2-550: 550 lbs / 250 Kg / 2500 N
MX2-1100: 1000 lbs / 500 Kg / 5000 N
StrokeMX2-110: 9.4 In / 240mm
MX2-275: 12.2 In / 310mm
MX2-550: 12.2 In / 310mm
MX2-1100: 12.2 In / 310mm
Travel RateRefer to Speed Range Table above
Minimum Travel In Jog ModeMX2-110: 0.015mm
MX2-275: 0.010mm
MX2-550: 0.050mm
MX2-1100: 0.050mm
DimensionsSee Download Section
Compatible GaugesZTA and DST
Warranty2 years
Distance Meter RangeS Version: 8"
S12 Version: 12"
*NoteOptional Distance Meter Max Sampling Rate Output - 2 Samples Per Second
MX2-275 Shipping Weight192 lbs
MX2-275 Shipping Dims41 x 26 x 25 inches

Downloads

Buy Now

Item Description Price
MX2-275
Motorized Test Stand, 275lbs
$5,104.00
Accessories
Lexan Safety Shield
$295.00
Interface Cable, Test Stand to ZTA Force Gauge
$181.50
CB-704
Force Control Cable, MX2 to Z2 or ZP
$181.50
CB-707
Force Control Cable plus RS232 Output Cable, MX2 to Z2 or ZP
$214.50
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable