The DI-3N is no longer available. It has been directly replaced by the DIS-IP, click here for more info
Digital Torque Tester with flanged remote sensor calibrates torque tools up to 362 lb-ft. It has an accuracy of ±0.5% F.S., ± 1 LSD and measures torque in Peak, Real Time and Peak Down modes (selectable).
Do not use with impact tools (Use DI-1M impact wrench torque tester).
Use the 400 internal memory for peak data recall or RS-232C download for analysis by our data acquisition software SW-1S.
- Heavy duty metal construction
- lbf-in, kgf-cm, N-cm, or lbf-ft, kgf-m, N-m (see table below)
- 400 data memory for recall or for SPC download
- RS-232C output for SPC capability (peak data only)
- Peak, Real Time and Peak Down measuring modes (selectable)
- Accuracy: ±0.5% F.S. ±1 LSD (32° to 100°F)
- Both clockwise and counterclockwise operation
- AC adapter/charger included
- Runs on internal NiCad batteries (8 hour use)
| Model | Capacity | Drive |
| DI-3N-1P5 |
0.30~44.00 lbf-in 0.30~50.00 kgf-cm 3.0~500.0 N-cm |
1/4" |
| DI-3N-1P50 |
3.0~440.0 lbf-in 3.0~500.0 kgf-cm 30~5000 N-cm |
3/8" |
| DI-3N-1P200A |
30~1800 lbf-in 30~2000 kgf-cm 3.0~200.0 N-m |
1/2" |
| DI-3N-1P200 |
3.0~145.0 lbf-ft 0.30~20.00 kgf-m 3.0~200.0 N-m |
1/2" |
| DI-3N-1P500 |
3.0~362.0 lbf-ft 0.30~50.00 kgf-mm 3.0~500.0 N-m |
3/4" |
