Web Orders Over $100 Ship Free. Enter Promo Code "SHIPFREE" for free UPS Ground Shipping at Checkout. (USA Only)

30388-0066 X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 1,000kg Capacity

Made in USA
X-C Mechanical Force Gauge with Hardened Ball
Click images to enlarge.
The Model X-C is available in nine capacities from 50 lb to 25,000 lb or 50 kg to 10,000 kg. Accuracy is ±1% of full range.

Load is applied against a hardened ball which rotates to maintain vertical alignment as pressure increases. The ball is held in place with a spring clip or retainer. A threaded mounting hole is located opposite the loading ball in the bottom of the beam.

Proven accuracy and ruggedness sets our mechanical force gauge apart in the force measurement industry. The "D" shaped deflection beam is the heart of the X-C. Highly engineered materials with close machining tolerances and proper heat treatment provide optimum strength and spring characteristics.

Calibration is available in pounds or kilograms.

NIST Traceable Calibration Certificate is included.

24-month Limited Manufacturer's Warranty

Made in the USA

Ranges

ModelCapacityResolution
30386-003550 lb0.5 lb
30386-0043100 lb1 lb
30446-0033250 lb2.5 lb
30446-0017500 lb5 lb
30444-00191,000 lb10 lb
30388-00172,000 lb20 lb
30389-00165,000 lb50 lb
30423-001410,000 lb100 lb
30449-001425,000 lb250 lb

Low Beam Deflection

CapacityDeflection
50 - 250 lb (25 - 100 kg)0.019"
500 lb (200 kg)0.016"
1,000 lb (500 kg)0.018"
2,000 lb (1,000 kg)0.011"
5 and 10,000 lb (2 and 5,000 kg)0.010"
25,000 b (10,000 kg)0.022"
When measured across the center of top- and bottom-loading holes

Display Callout

X-ST Mechanical Force Gauge Display Callout
1. Deflection beam
2. Dial indicator with zero at standard 12:00 position
3. Bezel
4. Maximum load pointer (optional)
5. Pressure button
6. Slanted Anvil
7. Dial indicator plunger
8. Anvil set screw
9. Mounting bracket for dial indicator
10. Screws for mounting bracket
11. Bezel-locking screw
12. Loading ball
13. Spring retainer clip

Principle of Operation

A D-shaped deflection beam is the heart of the Dillon Force Gauge. Machined to close tolerances, beams are heat treated to develop optimum strength and spring characteristics. High-strength aluminum is used in Model X instruments through 500 lb (200 kg). Ranges above this are fabricated from aircraft-quality alloy steel.

A precision dial indicator is mounted at the null point of the deflection beam. The indicator plunger rests against a slanted anvil at the open end of the beam, as shown in the photo. Under compression loads, the two halves of the beam tend to close. Tension force causes them to move apart. This action pushes the plunger inward, as determined by the slant of the anvil. Readings produced on the dial are in direct relation to applied load. The pointer revolves 360° clockwise under compression or tension forces. Push-pull gauges read half scale (180°) clockwise in compression, and counterclockwise, 180° from center zero under tension loads.

Options

  • Shockless dial indicator for installations involving the sudden application or release of force. (Maximum pointer cannot be supplied with shockless dial indicator)
  • Maximum load pointer which remains at peak load until manually reset.
  • Zero position on dial may be factory positioned at 12, 3, 6, or 9 o'clock. Standard position is at 12 o'clock.

Specifications

Warranty2 Years
Accuracy±1%
Model 30449-0014: ±2%
Operating Temperatureup to 120°F (48°C)
Overload ratingAccidental overloads up to 30% of capacity can be safely sustained without injury to the dial indicator or deflection beam. All capacities feature a 5:1 design safety factor.

Downloads

Buy Now

Item Description Price
30388-0066
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 1,000kg Capacity
$2,210.00
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable