Web Orders Over $100 Ship Free. Enter Promo Code "SHIPFREE" for free UPS Ground Shipping at Checkout. (USA Only)

GELOMAT Automatic Capsule Hardness Tester

Made in Germany
GELOMAT Automatic Capsule Hardness Tester
Click images to enlarge.
The Bareiss Digi Test II GELOMAT is a fully automatic and modular digital hardness tester commonly used by many of the leading pharmaceutical vitamins and even paintball companies around the world. In today’s increasingly interconnected and highly regulated global markets, adherence to ‘critical-to-quality’ attributes is required to deliver best-in-class products. To prevent defective capsules from reaching the market, these companies are relying on a reliable capsule hardness tester to apply a compressive force to the gelatin capsules to confirm they have sufficient wall strength to withstand external forces during manufacturing, storage, packaging, transport, and finally when used by a consumer.

Features

  • User-Friendly: This automatic shore hardness tester is equipped with an electronic unit that can show user information, time, and method of measurement, and is equipped with various other configurations along with automatic measurement of time and range detection.
  • Mechanism: The measuring devices (0-20N & 0-2N) have an easy plug-and-play solution with no complex mechanism. The measuring devices can easily be fastened by hand using the knurled nut and the electronic unit can easily detect the device once it is set up.
  • Complexity: Gelatin capsules of different shapes can easily be tested using different manual & automatic fixtures.
  • It is FDA 21 CFR Part 11 compliant and comes with a 3-Q validation report ready as requested by customers.
GELOMAT Automatic Capsule Hardness Tester GELOMAT Automatic Capsule Hardness Tester

Operating Procedures

  1. The electronic unit is switched on and the additional weights are loaded on the pickup bracket for the measuring load of range 0-20 N and no additional load is required for the measuring load of 0-2N.
  2. For Gelatin capsules centrofix fixture is used on the supporting table. Care must be taken to align the centrofix parallel to pick up bracket which is tightened with the help of knurled screws.
  3. The distance between the indenter and the centrofix should be adjusted up to 10 mm by loosening the clamping lever of the pickup bracket and pushing down carefully unit this distance is reached.
  4. The counter nut is loosened, and the knurled nut is rotated until the indenter is in the center of the template.
  5. The measurement is started by pressing the ‘Start’ button on the electronic unit and the measuring device is lowered onto the capsule automatically.
  6. After reaching the activated lift the measuring device moves back to its initial position. The recommended lift is 2.0 mm.
  7. The measured value is shown on the display and is transferred via the interface at the same time.

Specifications

FDA 21 CFR Part 11Compliant with a 3-Q Validation Report
ISO/17025ISO/17025 Accredited Calibration Certificate Available
Technical Data
Power supply 100-240VAC; 50/60 Hz
Fuse 2 pieces of fine fuses 3.15 A slow (3.15 AT)
Power consumption Max. 20VA
Kind of protection IP 20
Display LCD – graphical display (240*128 Pixel) with LED
Resolution   0.1
Lift 0.1 - 9.9 mm
Data output USB/ RS 232- 9600 Baud, 1 start bit, 8 Data bits, 1 Stop bit
Connections Pick-up bracket with measuring device
Dimensions (L*W*H), weight Test stand: 200*250*535 mm 9.0 kgs
Pick-up bracket: 165*135*60 mm 3.0 kgs
Measuring device: 160*100*140 mm 1.7 kgs
Electronic Unit: 258*260*100 mm 2.0 kgs
Range Of Application
Test Method Range of Application Lift Indenter   Mode
  Gelomat (0-20 N) Determination of material hardening on gelatin capsules and elasticity 2 mm Ø 10 mm Standard Charge
curve Flow
curve Peak
  Gelomat (0-2 N) Determination of gel stability and gel capacity, agar-agar 2 mm surface:
10 mm2 = Ø 3,75 mm
Standard Charge
curve Flow
curve Peak

Dimensions

Downloads

Request Quote

Please complete the reCAPTCHA to verify that you are a Human.
Please enable javascript in order to submit this form.

Thank You

Thank you for your quote request, we will contact you within 1-2 business days.

There was an error submiting the form. Please try again.