The RX-2000 durometer is the latest innovation for the testing of specimens with creep. The RX-2000 has a second needle which holds the highest measurement. This helps the operator observe the creep characteristics of a specimen. To reset the peak indicator the user simply rotates the reset knob on the front of the gauge to clear the previous reading. The simplicity of the reset mechanism ensures a lifetime of use, and makes the RX-2000 the most affordable durometer for testing specimens with creep.
- Includes NIST-Traceable Calibration Certificate
- Custom Made Carrying Case
- Reads Maximum and Creep
- One Year Warranty
- Conforms to ASTM D-2240
- Holds Reading Until Reset
- Cost Effective, Hand Operated
|Measuring Range||0 - 100 units|
|Accuracy||±1 durometer unit (A,B,C,D,E,O,DO)|
|Tolerance||± 0.5 at "100" and -0 +1 at "0"|
|Dimensions||2.25" x 6.125"H|
|* Note||per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings below 20 or above 90 are not considered reliable. It is suggested that readings in these ranges be omitted.|
Type A Durometer with Memory Pointer, for Soft rubber, plastics and elastomers.
Type B Durometer with Memory Pointer, for Harder elastomers and plastics. Use above 93 A scale.
Type C Durometer with Memory Pointer, for Medium hard elastomers and plastics.
Type D Durometer with Memory Pointer, for Hard rubber and plastics
Type DO Durometer with Memory Pointer, for Dense granular material and textile windings.
Type O Durometer with Memory Pointer, for soft elastomers below 20 A scale
Type A Test Block Kit with NIST traceable certificate, 7 Color Coded Blocks
Type D Test Block Kit with NIST traceable certificate, 3 Color Coded Blocks
Upgrade to Removable Stainless Steel Barrel for Medical and Food Applications
(Must be specified at time of order, not suitable for use with RX-1600-M or RX-1600-OOO-S)
Rectangular Footer for Durometers with 1/2" Diameter Barrel, 41 x 19 mm