The MT2013 Tachometer and stroboscope calibration test system is designed for test and calibration of Digital Optical Tachometers, Optical Speed sensing products and Stroboscopes.
The MT2013 is suitable for Calibration of virtually any make of Optical Tachometer, Optical Speed Sensors and Stroboscopes, in addition, they can be used with Digital Panel Tachometers, Ratemeters, Batch counters and similar pulse related products.
The Calibrator can be used to test Panel and Bench type Tachometers via the pulse output feature and also tests proximity and optical speed Sensors.
The MT2013 includes a VLS5/J optical speed sensor for stroboscope calibration as well as a DIN to 3.5mm jack plug used for checking the remote input on Compact tachometers and a general purpose DIN to bare leads connector.
The MT2013 is suitable for Calibration of virtually any make of Optical Tachometer, Optical Speed Sensors and Stroboscopes, in addition, they can be used with Digital Panel Tachometers, Ratemeters, Batch counters and similar pulse related products.
The Calibrator can be used to test Panel and Bench type Tachometers via the pulse output feature and also tests proximity and optical speed Sensors.
The MT2013 includes a VLS5/J optical speed sensor for stroboscope calibration as well as a DIN to 3.5mm jack plug used for checking the remote input on Compact tachometers and a general purpose DIN to bare leads connector.
Example of Non-Contact Tachometer Calibration with MT2013
Example of Stroboscope Calibration with MT2013
- Supplied with UKAS Traceable Calibration Certificate
- Wide input pulse rate range – 0.05 – 200 KHz using the input divider and scaling features
- 5 Digit LED display
- Full scaling facilities up to 5 digits
- Low speed capability – 3 rpm to 0.001 resolution
| Digital Display | 5 Digit LED - displays input or output speeds |
| Speed Range | 3 – 100,000 rpm in 4 ranges |
| 4 position Selector switch | |
| Speed Adjustment | Fine adjust via multi turn potentiometer |
| Accuracy | ± 0.01% ± 1 digit |
| Resolution | Autoranging max. 0.001 rpm |
| Output Facilities | LED attachment for Optical Tachometers TL pulses for Digital Instrumentation |
| Input Facilities | Optical Sensors [supplied] ( can be used for Stroboscope calibration), Proximity Sensors 3 wire 10-30vdc types, TTL input & magnetic Sensors |
| Sensor Supplies | 5vdc & 12vdc |
| Controls | Signal in/out switch for Tachometers or Strobes |
| Input/Outputs | Strobe output Via 3.5mm Stereo socket |
| Signal Input | Via 5 pin DIN socket |
| Sensor Power | Via signal input socket |
| Power Input | 110/240vac (dc options by request) |
The MT2013 is supplied with:
• Instruction Manual
• MT2013 Main Calibration Unit
• VLS5/J Speed Sensor
• 3.5mm Jack Plug
• 3 Output Leads
• Carrying Case
• Power Cord (Specify voltage and plug type when ordering)
• Reflective Tape
• Certificate of Calibration
• Instruction Manual
• MT2013 Main Calibration Unit
• VLS5/J Speed Sensor
• 3.5mm Jack Plug
• 3 Output Leads
• Carrying Case
• Power Cord (Specify voltage and plug type when ordering)
• Reflective Tape
• Certificate of Calibration
| Item | Description | Price | ||
|---|---|---|---|---|
Tachometer and Stroboscope Calibrator (115V or 230V please specify) | $3,435.00 | |||
| Accessories | ||||
ISO-17025-MT2013 | ISO-17025 Calibration Certificate for MT2013 | $300.00 | ||
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable
