|
|
|
MTM
Multi-Range Torque Tester |
The MTM Series of torque transducer are designed to provide an economical way to measure and calibrate multiple torque tools. The MTMDP models (MTMDP-2S pictured) include an integrated display for a fully integrated tester.
Historically, transducers had to be purchased individually and connected to a display via a switch box or a group of cables. With the MTM series, up to 4 transducers can integrated in one compact housing.
The small footprint also allows for a clean, well-organized work space. This helps eliminate the endless searching for cables, adapters, and other accessories that may be needed.
Features such as independent CW and CCW calibration, multi-point linearization, metrology grade transducer shafts, and overload protection to 200% of full scale are standard. All of the above translate to a better product for you at an unbeatable price.
* MTMDP-2 coupled with an MTM-4. |
 Available with 2, 3 or 4 torque transducers | | Selectable units of: Ft-lb, IN-lb, IN-oz, KGF-m, KGF-cm, GF-cm, CN-m, N-m | | Small footprint of the MTM allows for a clean, well-organized work space | | 200% Overload protection | | LED Indicator Shows Active Transducer |
| | Connect External transducers with optional input jack | | Includes NIST Traceable calibration certificate with data for each transducer | | Replaceable shaft design. If one shaft is damaged, replace that shaft, not the entire unit. | | Hi-Lo Limits for Go-NoGo testing of tools | | Accuracy of ±0.5% of Indicated Value (within calibrated range) |
|
MTMDP-3S, with 3 horizontal transducers and flange-mount bracket
| Model |
Range |
Drive
Size |
Run-Down
Fixture |
ITIO-10 |
1 - 10 Oz-in |
1/4" |
Included |
ITIO-50 |
5 - 50 Oz-in |
1/4" |
Included |
ITIO-100 |
10 - 100 Oz-in |
1/4" |
Included |
ITI-10 |
1 - 10 Lb-in |
1/4" |
Included |
ITI-25 |
2.5 - 25 Lb-in |
1/4" |
Included |
ITI-50 |
5 - 50 Lb-in |
1/4" |
Included |
ITI-100 |
10 - 100 Lb-in |
1/4" |
Included |
ITI-250 |
25 - 250 Lb-in |
3/8" |
Included |
ITI-500 |
50 - 500 Lb-in |
3/8" |
Included |
ITF-100 |
10 - 100 Lb-ft |
1/2" |
Optional |
ITF-150 |
15 - 150 Lb-ft |
1/2" |
Optional |
ITF-250 |
25 - 250 Lb-ft |
1/2" |
Optional |
ITF-750 |
75 - 750 Lb-ft |
3/4" |
Optional |
ITF-1000* |
100 - 1000 Lb-ft |
1" |
Optional |
ITF-2000* |
200 - 2000 Lb-ft |
1" |
Optional |
ITF-3000* |
300 - 3000 Lb-ft |
1 1/2" |
Optional |
ITF-5000* |
500 - 5000 Lb-ft |
1 1/2" |
Optional |
Alternative Unit Calculator- recasts values in above table
(units in RED can be selected on gauge. Other units for reference only)
|
| *Note: Ranges over 750 ft-lbs are supplied as cable connected external sensors. Please contact us for more information.
Don't see the range you need? Custom ranges are available, please call 800-645-4330 to discuss your application.
ER - Extended Range Option increases certified range to 5-100% (instead of 10-100%) |
|
TT-3000 Series
Torque Analyzer |  |
Bidirectional accuracy of ±0.5% of indicated reading | | Click image for more info | | |
|
RDF
Joint Simulators / Run Down Fixtures |  |
Required for accurate torque measurement for power-driven torque controled tools (electric, hydraulic or pneumatic) | | Click image for more info | | |
|
Series IT
Static Bench Mounted Torque Transducers |  |
Ranges from 10 Oz.in. to 2,000 Lb.ft. Accuracy 0.5% of indicated between 10-100% of capacity | | Click image for more info
|
|
Calibrated Range
|
10-100% Full Scale, bi-directional (Standard)
|
|
Extended Range
|
5-100% Full Scale, bi-directional (ER Option)
|
|
Accuracy
|
±0.5% of indicated value (within calibrated range)
|
|
Resolution
|
4 Active Digits
|
|
Overload Protection
|
200% Full Scale bi-directional
|
|
Operating Modes
|
Track, Peak, 1st Peak
|
|
Filtering
|
Selectable; 125Hz, 250Hz, 500Hz, 1000Hz, 1500Hz and 2000Hz
|
|
Memory
|
data storage of up to 999 readings
|
|
Data Output
|
RS-232
|
|
Display
|
62 x 62mm backlit LCD
|
|
Alarm Limits
|
Panel Mounted LED for Visual Alarm Limits
|
|
Power
|
NiMH rechargeable batteries provide 8-10 hours continuous use
|
|
Weight
|
6-12 lbs, depends on number of transducers and configuration
|
|
Operating Temp
|
32 - 120 °F (0-50 °C)
|
|
Warranty
|
1 Year
|
|
Calibration Certificate
|
Includes NIST Traceable calibration certificate with data for each transducer
|
|
Standard Accesories
|
Joint Simulator for 1/4" & 3/8" drives, AC adapter/Charger
|
|
Optional Accessories
|
Joint Simulators for 1/2", 3/4" & 1" Transducers, Extended Ranger "ER" Option
|
|
|
|
Features
