View Larger Image
|
|
MTM
Multi-Range Torque Tester |
The MTM Series of torque transducer are designed to provide an economical way to measure and calibrate multiple torque tools. The MTMDP models (MTMDP-2S pictured) include an integrated display for a fully integrated tester.
Historically, transducers had to be purchased individually and connected to a display via a switch box or a group of cables. With the MTM series, up to 4 transducers can integrated in one compact housing.
The small footprint also allows for a clean, well-organized work space. This helps eliminate the endless searching for cables, adapters, and other accessories that may be needed.
Features such as independent CW and CCW calibration, multi-point linearization, metrology grade transducer shafts, and overload protection to 200% of full scale are standard. All of the above translate to a better product for you at an unbeatable price.
* MTMDP-2 coupled with an MTM-4. |
 Available with 2, 3 or 4 torque transducers | | Selectable units of: Ft-lb, IN-lb, IN-oz, KGF-m, KGF-cm, GF-cm, CN-m, N-m | | Small footprint of the MTM allows for a clean, well-organized work space | | 200% Overload protection |
| | LED Indicator Shows Active Transducer | | External transducers can be connected with cable input | | Includes NIST Traceable calibration certificate with data for each transducer | | Replaceable shaft design. If one shaft is damaged, replace that shaft, not the entire unit. |
|
| MTMDP-3S, with 3 horizontal transducers and flange-mount bracket |
| Model |
Range | Drive
Size | Run-Down
Fixture |
ITIO-10 | 1 - 10 Oz-in | 1/4" | Included |
ITIO-50 | 5 - 50 Oz-in | 1/4" | Included |
ITIO-100 | 10 - 100 Oz-in | 1/4" | Included |
ITI-10 | 1 - 10 Lb-in | 1/4" | Included |
ITI-25 | 2.5 - 25 Lb-in | 1/4" | Included |
ITI-50 | 5 - 50 Lb-in | 1/4" | Included |
ITI-100 | 10 - 100 Lb-in | 1/4" | Included |
ITI-250 | 25 - 250 Lb-in | 3/8" | Included |
ITI-500 | 50 - 500 Lb-in | 3/8" | Included |
ITF-100 | 10 - 100 Lb-ft | 1/2" | Optional |
ITF-150 | 15 - 150 Lb-ft | 1/2" | Optional |
ITF-250 | 25 - 250 Lb-ft | 1/2" | Optional |
ITF-600 | 60 - 600 Lb-ft | 3/4" | Optional |
ITF-1000 | 100 - 1000 Lb-ft | 1" | Optional |
ITF-2000 | 200 - 2000 Lb-ft | 1" | Optional |
ITF-3000 | 300 - 3000 Lb-ft | 1 1/2" | Optional |
ITF-5000 | 500 - 5000 Lb-ft | 1 1/2" | Optional |
| |
Alternative Unit Calculator- recasts values in above table
(units in RED can be selected on gauge. Other units for reference only)
|
| Don't see the range you need? Custom ranges are available, please call 800-645-4330 to discuss your application.
ER - Extended Range Option increases certified range to 5-100% (instead of 10-100%) |
|
TT-3000 Series
Torque Tester |  |
Bidirectional accuracy of ±0.5% of indicated reading | | Click image for more info | | ___________________________________________ |
|
RDF
Joint Simulators / Run Down Fixtures |  |
Required for accurate torque measurement for power-driven torque controled tools (electric, hydraulic or pneumatic) | | Click image for more info
|
| Calibrated Range |
10-100% Full Scale, bi-directional (Standard) |
| Extended Range |
5-100% Full Scale, bi-directional (ER Option) |
| Accuracy |
±0.5% of indicated (within calibrated range) |
| Resolution |
4 Active Digits |
| Overload Protection |
200% Full Scale bi-directional |
| Operating Modes |
Track, Peak, 1st Peak |
| Filtering |
Selectable; 125Hz, 250Hz, 500Hz, 1000Hz, 1500Hz and 2000Hz |
| Memory |
data storage of up to 999 readings |
| Data Output |
RS-232 |
| Display |
62 x 62mm backlit LCD |
| Alarm Limits |
Panel Mounted LED for Visual Alarm Limits |
| Power |
NiMH rechargeable batteries provide 8-10 hours continuous use |
| Weight |
6-12 lbs, depends on number of transducers and configuration |
| Operating Temp |
32 - 120 °F (0-50 °C) |
| Warranty |
1 Year |
| Calibration Certificate |
Includes NIST Traceable calibration certificate with data for each transducer |
| Standard Accesories |
Joint Simulator for 1/4" & 3/8" drives, AC adapter/Charger |
| Optional Accessories |
Joint Simulators for 1/2", 3/4" & 1" Transducers, Extended Ranger "ER" Option |
|
|
