View Larger Image
|
|
DT-314
External Trigger Stroboscope |
Range: 0-15,000 RPM/FPM
The DT-314 Stroboscope is intended to be machine mounted for continual visual inspection and monitoring of the machine’s action; it operates only on external mode in order to synchronize its flashing with the speed (rotation, vibration, etc.) of the equipment under observation. No display is necessary, as the strobe’s main function is to observe the action as it happens, resulting in an incredibly rugged and economical unit.
|
 Provides 12 VDC power for external sensor | | No operator controls | | Removable handle for hand-held use or fixed mounting |
| | Rugged extruded aluminum housing | | High intensity flash |
|
|
SAS-DT300
Articulating Stroboscope Swing Arm |  |
41" when fully extended Heavy duty construction with internal springs | | Click image for more info | | ___________________________________________ |
|
SG-300
Protective Rubber Caps for 300 Series Stroboscopes |  |
Molded rubber caps to provide protection in harsh industrial environments | | Click image for more info
|
| Flash Range |
0-15,000 FPM |
| Input Signal |
LO level: 0-0.4 VDC
HI level: 2.5 - 12 VDC -- or open collector (npn)
pulse width 50us min |
| Impedance |
10K |
| Flashtube |
Xenon, 10W maximum |
| Flash Duration |
50 microseconds approximately |
| Sensor Power Supply |
12 VDC ± 0.5V (50ma) |
| Power Requirements* |
115VAC or 220 AC ± 10% 60/50Hz, 30 VA |
| Operating Temperature |
32-104° (0-40°C) |
| Dimensions |
4.72"W x 4.72"H x 7.19"L (120 x 120 x 182.5) mm |
| Weight |
2.4lbs (1.1kg) |
| Accessories Available |
Strobe Carrying Case |
| Warranty |
1 year |
|
|
