High Capacity Motorized Vertical Test Stands

MV-500 - MV-1100
High Capacity Motorized Vertical Test Stands

Capacity:
MV-500: 500 lbs
MV-1100: 1100 lbs

These motorized test stands offer consistent and reliable testing. The combination of ball screw system and state of the art brushless motor provides extremely smooth and powerful operation over the entire speed range. It features dual speed mode: fixed speed (presettable) and adjustable speed. They accept any of the standard range force gauges. Quick return and Emergency Stop features are also included.

Basic Models
Basic Models have top and bottom travel limits that can be adjusted for a precise range of movement. Set the travel limits, flip the direction switch up to move the cross head up to the top travel limit at the selected speed. Flip the direction switch down to send the cross head down to the bottom travel limit. The speed is set by a Speed Adjust knob. Quick Return and Emergency Stop features are also included.

Auto Cycle Models
Auto cycle models have top and bottom travel limits that can be adjusted for a precise range of movement. Speed Adjust, Quick Return and Emergency Stop features are also included. These stands have three function modes.

Manual Mode: While the Direction switch is held up, the head moves up. Holding the switch down moves the cross head down. When the switch is released the head stops. This mode is ideal for positioning.

Single Cycle Mode: When the Direction switch is pushed up, the cross head moves up at the desired speed, and when it reaches the top travel limit, it automatically goes back and stops at the bottom travel limit, completing one cycle. Pushing the switch down runs the cycle in reverse.

Auto Cycle Mode: This mode is similar to Single Cycle mode, except that the cross head travels up and down repeating the cycle until either the Power or Emergency switches is turned off. This mode is ideal for applications such as fatigue testing.

*FORCE GAUGE NOT INCLUDED
Designed to work with the DPSH & Z2S-DPU force gauges.

One stand for both compression (push) and tension (pull) tests

Combination of ball screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.

Stroke: 16"

Test speed mode: fixed (presettable) or adjustable Return speed: fixed max. or adjustable

Auto cycle feature

Optional dynamic and static distance meter available

LP-99 Lexan Safety Shield
Helps protect personnel from injury by containing debris during testing
	Click image for more info
___________________________________________

DPSH High Capacity Digital Force Gauge
lb, kg, and Newton units are push-button selectable RS-232C, Digimatic and analog outputs
	Click image for more info
___________________________________________

NIST CAL

	Click image for more info

Model	MV-500	MV-1100
Standard Speed	.3~9.5"/min	.4~4"/min
Optional High Speed	.5~15.7"/min	.8~8"/min
Optional Low Speed	.2~4.7"/min	.2~2"/min

Capacity	MV-500: 500 lbs MV-1100: 1100 lbs
Stroke	16"
Travel Rate	Refer to Speed Configurations above>
Dimensions	Refer to Downloads below for PDF drawings
Compatible Gauges	DS2, Z2, ZP, ZPH and DPSH
Warranty	2 years
*Note	Optional Distance Meter Max Sampling Rate Output - 2 Samples Per Second