View Larger Image
|
|
3000PRO
Coating Thickness Gauge with Interchangeable Probes |
The new Check-Line 3000PRO Series coating thickness gauge is a multifunctional fully menu driven gauge for fast, professional and precise coating thickness measurement for:
paint and electroplated coatings on iron and steel
paint and anodising coatings on non-ferrous metals and on austenitic stainless steels
The user will select one or more probes best suited for their application to connect to the 3000PRO gauge as all the probes are interchangeable and their internal calibration is stored within a small micro0chip inside the probe connector housing. This provides for quick and easy hot-swapping from one probe to any other in seconds.
Eight (6) separate probes are offered for a wide variety of applications. |
 Automatic identification of the substrate | | Highly wear-resistant measuring poles made of carbide metal | | Special probes for unusual
measurement tasks | | Safe use even for special applications such as sand-blasted surfaces, small parts and curved surfaces | | Scan mode for the quick recognition of coating thickness variations on
large surfaces, including display of minimum and maximum readings | | Display backlight for poor ambient lighting conditions | | Online statistics with all statistical parameters |
| | Extensive memory storage for recording of up to 10,000 data pints in up to 500 separate files "batches" | | Alphanumerical file names can be used to identify each of the separate files "batches" | | Infrared interface for wireless data transfer to printer and PC or via built-in RS-232 | | Includes FREE software for transferring data to a PC including histogram function | | Optional high temperature footer for measuring on surfaces up to 150 °C/302 °F | | Includes NIST-Traceable Calibration Certificate | | 1 Year Warranty |
|
 |
Probe
|
Type |
Range |
| Standard Probes |
|
Fe |
0 – 60 mils (0 – 1500 µm) |
|
NFe |
0 – 60 mils (0 – 1500 µm) |
|
Fe+NFe |
0 – 60 mils (0 – 1500 µm) |
| Micro Probe for very thin coatings |
|
Fe+NFe |
0 – 8 mils (0 – 200 µm) |
| Probes for thick coatings |
|
Fe |
F: 0 – 140 mils (0 – 3500 µm)
N: 0 – 120 mils (0 – 3000 µm) |
|
Fe+NFe |
0 – 140 mils (0 – 3500 µm) |
"F" Probes measure Coatings on Ferrous Metals
"N" Probes measure Coatings on Non-Ferrous Metals
"FN" Probes measure Coatings on both Ferrous & Non-Ferrous Metals |
|
|
3000-PTS
Coating Thickness Gauge Test Stand |  |
Spring loaded lever for fast & precise travel It's Compact size and light weight make it an Ideal test stand for all workplaces | | Click image for more info | | ___________________________________________ |
|
3000-IRP
Infra-Red Printer for 3000 Series |  |
Infra-Red data transfer 16 lines/second print speed | | Click image for more info | | ___________________________________________ |
|
TS-5CG
Commercial Grade Shim Set |  |
| | Click image for more info | | ___________________________________________ |
|
CPS
Certified Plastic Shims |  |
| | Click image for more info
|
| | | | The 3000PRO is supplied as a complete that includes the gauge, probe, manufacturers calibration certificate, a ferrous and or non-errous zero plate(model dependant), 2 calibration foils, 2 AA batteries, soft pouch, instruction manual all in a rugged plastic carrying case. |
 |
 |
Minimum Radius
for Convex Surfaces |
0.08" (2 mm) |
| Minimum Radius
for Concave Surfaces |
0.2" (5 mm) |
 |
Minimum Headroom |
4" (100 mm) |
 |
Minimum Sample
Diameter |
0.2" (5 mm) |
 |
Minimum Substrate Thickness - F |
8 mils (0.2 mm) |
| Minimum Substrate Thickness - NFe |
2 mils (50 µm) |
|
Standard
probe & and FN/90° probe |
|
Mils |
| 0.00 - 9.99
mils |
0.01 mils |
| 10.00 -
24.98 mils |
0.02 mils |
| 25.00 -
49.95 mils |
0.05 mils |
| 50.0 - 99.9
mils |
0.1 mils |
| |
|
Microns (µm) |
| 0.0 - 99.9
µm |
0.1 µm |
| 100.0 -
249.8 µm |
0.2 µm |
| 250.0 -
499.5 µm |
0.5 µm |
| 500 - 999 µm |
1 µm |
| 1.000 -
1.998 mm |
0.002 mm |
|
| Measuring principle: |
Magnetic induction method (F-version); Eddy current method (N-version) |
| Measuring range: |
3000PRO:
0 - 60.00 mils / 0 - 1500 µm |
| Tolerance: |
± (0.7 µm/0.04 mils + 1% of reading) |
| Resolution: |
Refer to RESOLUTION TABLE, above |
| Display: |
4-digit display (digit height 10 mm/0.4”) and 32 alphanumerical characters; switchable backlight |
| Minimum measurement area: |
5 mm x 5mm/0.2” x 0.2” |
| Minimum curvature radius: |
convex 2mm/0.08”; concave 5mm/0.2” |
| Minimum substrate thickness: |
0.2mm/8 mils (for F-versions); 50 µm/2 mils (for N-versions) |
| Calibration methods: |
- Factory calibration: no calibration required for standard applications
- Zeroing (1-point calibration): measurements on small geometries
- Zeroing and foil calibration (2-point calibration): increased measuring accuracy
- Two-foil calibration: especially for rough, sand-blasted surfaces
- CTC: calibration on coated object if zeroing is not possible
- Zero offset: addition/subtraction of a constant value to/from the reading |
| Limit values: |
Selectable; optical and acoustic signal if limit value is exceeded |
| Scan mode: |
For continuous measurements; for the quick recognition of coating thickness variations;
with permanent display of minimum and maximum reading |
| Statistics: |
Single-value statistics: n, avarage x, s, kvar, min, max, cp, cpk from max. 10,000 readings
Block-value statistics: n, avarage x , avarage s, avarage kvar , min, max, cp, cpk; block size 3 to 100 readings |
| Data memory: |
10,000 readings in max. 500 selectable files; alphanumerical file names; stored readings and statistical values individually recallable |
| Interfaces: |
Infrared and serial RS232 interface |
| Language: |
Operator prompting and documentation in German, English, French (optional other languages) |
| Operating temperature: |
0 °C to 50 °C/32 °F to 122 °F (storage temperature - 20 °C to +60 °C/-4 °F to 140 °F) |
| Surface temperature: |
5° F - 140° F / -15° C - 60° C (standard)
5° - 302° F / 15° - 150° C (w/optional footer) |
| Power supply: |
2 x round cell (AA) 1.5 V up to 60 hours of operating time |
| Housing/keypad: |
Protection class IP52 (protection against dust and dripping water) |
| Dimensions: |
Gauge: 140 mm x 62 mm x 30mm/5.6” x 2.5” x 1.2” (HxWxD)
Probe: dia. 14 mm x 83mm/dia. 0.56” x 3.3” |
| Weight: |
approx. 200 g/7 oz (gauge including batteries and probe) |
| Standards: |
DIN EN ISO, ASTM, BS |
| Warranty |
1 Year |
| Calibration Certificate |
Included |
|
|
