Web Orders Over $100 Ship Free. Enter Promo Code "SHIPFREE" for free UPS Ground Shipping at Checkout. (USA Only)

Positector®

Positector® coating thickness gauges, Positector® paint thickness gauges, Positector® dew point meter, Positector® adhesion tester

Click the product image below for complete details

Coating Thickness Gauge to measure coating thickness on both ferrous and non-ferrous metals, accurately and quickly
Many versions available for a wide range of applications
All models offer memory and data output. Bluetooth and Wifi Output is optional
Coating Thickness Gauge for wood, concrete, plastic and more
Measuring Range: 0.5 - 150 mils (13 - 3800 µm)
Separate Probe
Available models:
200B - 0.5 - 40 mils
200C- 2 - 150 mils
200D- 2 - 300 mils
Measures and records climatic parameters including: Relative humidity, air temperature, surface temperature, dew point temperature, wind speed and difference between surface and dew point temperatures.
Auto Log mode - automatically records environmental parameters at user selected time intervals
Surface Profile Gauge
Measures and records peak to valley surface profile heights.
Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30° tip angle), U.S. Navy NSI 009-32, SANS 5772 and others.
Easy to use Coating Thickness Gauge for Automotive and other common applications
Measuring Range:
0-40 mils (0-1000um)
Zero or 1 Point Calibration Adjustment for complex applications
Strong, wear resistant, ruby-tipped probe
Coating Thickness Gauge with Integral probe for one hand use on paint and coating applications
Range 0 - 60 mils (1500 µm)
Coating Thickness Gauge with High Precision Probe for measuring Anodizing thickness on aluminum
Measuring Range: 0-25 mils (0-625 µm)
Coating Thickness Gauge with Micro Probe for measuring thin coatings and small parts with hard-to-reach areas.
Measuring Range: 0-25 mils (0-625 µm)
Coating Thickness Gauge For thick paint and coatings from 0 to 250 mils
Measuring Range: 0-250 mils (0-6 mm)
Coating Thickness Gauge For extra thick paint and coatings from 0 -500 mils
Measuring Range: 0-500 mils (0-13 mm)
Coating Thickness Gauge For extra thick paint and coatings up to 2.5 inches (63.5 mm)
Measuring Range: 0 - 2.5 inches (0-63.5 mm)
Resolution: 0.01 inches (0.02 mm)
Positector PP-1 magnetic pull-off thickness gage measures non-magnetic coatings such as paint, enamel, plating, & hot-dip galvanizing on steel.
Measures in both microns and mils
Measuring Range: 0.25 to 20 mils (5 to 500 mcrons)
Barcol Hardness Impressor
Measures the hardness of soft metals such as aluminum, aluminum alloys, copper, brass, and other materials such as harder plastics, and fiber-reinforced plastic
Infrared Thermometer with Laser Pointer
Selectable emissivity values - choose from 7 preset material options, set a custom emissivity value, or adjust to a known temperature
5.7:1 distance to spot ratio - ideal for measuring large areas
Manual Adhesion Tester
Measures adhesion of coatings over metal, wood, concrete, plastic and other substrates
Conforms with ASTM D4541 / D7234, ISO 4624, SSPC-CS 23.00/AWS C2.23/NACE No. 12
Automatic Adhesion Tester
Electronically controlled hydraulic pump applies smooth and continuous pull-off pressure at a user-specified rate
Conforms with ASTM D4541 / D7234, ISO 4624, SSPC-CS 23.00/AWS C2.23/NACE No. 12
Magentic Coating Thickness Gauge - Banana Gauge
Measuring Range : 2 Ranges available up to 80mils (200 µm)
Explosion Proof - Refinery safe
Thickness Gauge for Uncured Powder Coating
Measures uncured powder coatings using non-contact ultrasonic technology to automatically calculate and display a predicted cured thickness.
Coating Thickness Gauge Probes For Use With 6000 Series
Low voltage Pinhole Detector
Lightweight, ergonomic design - while most other devices are box-shaped, the PosiTest LPD was specifically designed to fit comfortably in the hand with a balanced weight distribution
4 voltage output options conform to international standards
Easy to use Coating Thickness Gauge for Automotive and other common applications
Measuring Range:
0-40 mils (0-1000um)
Keypad-selectable units: Mils or Microns
Reversible display for inverted use
Suitable for outdoor use
Soluble Salt Tester
Conductivity probe specifically designed for ISO 8502-6,9
Displays test duration, sample temperature, conductivity (µS/cm) and surface density (mg/m2 or µg/cm2)
Range: 0 - 500 µS/cm, 0 - 2000 mg/m2, 0.0 - 200.0 µg/cm2
Interchangeable stand-off allows a PosiTest ATM50 or ATA50 to pull 10, 14 and 20 mm dollies.
Ideal for high bond strength finishes such as coatings on metal.
Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 50 mm dollies.
Ideal for lower bond strength finishes such as coatings on wood, concrete and plastic.
Ideal for measuring the tensile strength of concrete surfaces and concrete repairs and overlay materials
Conforms to ASTM C1583
Ideal for measuring the tensile strength of ceramic tile cementitious, dispersion and reaction resin adhesives
Conforms to BS EN 12004-2
Loading fixtures, stubs for adhesion testing
10 mm Dollies, 14 mm Dollies, 20 mm Dollies, 50 mm Dollies, 50 mm C1583 Dollies, 50 mm² Tile Dollies, 50 mm² Plate
Loading fixtures, stubs for adhesion testing
Larger quantity of dollies at a reduced cost
Additional glue, mixing sticks, palettes and cotton swabs.
Drilling template and drill bits to isolate test area, ideal for thicker coatings on concrete.
Includes (10) drill bits 5/32" (4 mm)
Concrete Moisture Meter - In Situ
Easily collect and report measurements in conformance with ASTM F2170
Combined sleeve and probe design simplifies the installation process and does not require consumables
Telescopic Probe Extender
Provides up to 124 cm (49") of reach and collapses to 47 cm (18.5") for easy storage
Articulating probe holder with rubber stabilizing ring provides secure probe contact at odd angles
Pelican Cases for Inspection Kits
Heavy-duty, waterproof, lightweight
Custom foam insert securely stores the PosiTector gauge body and multiple probes and accessories