View Larger Image
|
|
TSB2
Tension Sensor |
Tension meter for continuous measuring low and high tensions of textile ribbons, films, foils, fibre bunches etc.
Tape rollers mounted on both sides, max. width 100 mm |
 Dual-flanged outer guide rollers with various widths from 10 mm up to 100 mm | Various output signals:
• analog (0-1V DC)
• RS232 (optional)
• 0-10V DC (optional) | | Cylindrical tape roller, ball-bearing mounted | | Integrated measuring amplifier |
| | Easy calibration to customized material by operator | | Rugged aluminum housing | | Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report |
|
| Model |
Range | Roller Width (mm) |
| TSB2-1000 |
0 - 1000 g | 30, 36, 41, 50, 100 |
| TSB2-2000 |
0-2000 g | 30, 36, 41, 50, 100 |
| TSB2-5000 |
0-5000 g | 10, 15, 20, 30, 36, 41, 50, 100 |
| TSB2-10K |
0-10 Kg | 10, 15, 20, 30, 36, 41, 50, 100 |
| TSB2-20K |
0-20 Kg | 10, 15, 20, 30, 36, 41, 50, 100 |
| TSB2-50K |
0-50 Kg | 10, 15, 20, 30, 36, 41, 50, 100 | | |
| Important for your order: Please specify model and roller width!
Small dual-flanged outer guide rollers are standard. All 3 rollers can be equipped with one flange, if the material to be measured is wider than the rollers. Please request when you order.
Calibration to customized material:
If process material differs significantly from the Electromatic calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied. |
| |
|
TD-1-TE
Tension Indicator |  |
User-set High & Low Alarm Limits with relays TD-1 provides regulated +5 V DC for SR sensors 4-20 mA and 0-10 VDC analog output for recording and control purpose | | Click image for more info
|
If sensor is ordered only: 1 diode male plug
without connecting cable
If sensor and display unit is ordered:
1 connecting cable, tension sensor with packaging, operating instructions, and Certificate of Compliance with the order 2.1 according EN 10204 free of charge |
| Accuracy |
±1 % full scale ±1 digit other calibration material: ±3 % full scale or better |
| Overload protection |
100% of tension range |
| Measuring principle |
Strain guage bridge |
| Measuring roller deflection |
Max. 0.5 mm |
| Natural frequency |
Approx. 500 Hz, depending on tension range |
| Temperature drift |
less than ±0.05 % fullscale/ºC |
| Output signal |
0 - 1 V DC (analog) |
| Damping |
30 Hz |
| Temperature range |
10 - 45 ºC |
| Air humidity |
85 % RH, max. |
| Power supply |
+12 - 24 V DC, max. 50 mA regulated |
|
|
