View Larger Image
|
|
TX2
Tape Tension Meter with rollers point away from operator |
Special model where the rollers point away from the operator as the scale is viewed for applications where the access is limited to the front or top of the tape.
Cylindrical rollers are offered in 7, 10, 15, 20, 30, 36, 41 and 50 mm lengths. Roller length should not exceed 2x the width of the material being measured.
Tension Ranges: Refer to DX2 Data Sheet.
NOTE: Starting point of low-range instruments will be higher than DX2.
Note: This model does not include a filament guide and material thickness compensator |
 Dual-flanged outer guide rollers with various widths for better filament guide
(single-flanged rollers optional, recommendable if the material beeing measured is wider than the tape roller) | | Tape rollers with contact surface from 7 mm up to 50 mm are available | | Roller shifting mechanism ensure easy acquisition of the running material |
| Finger Support: We recommend
mounting a finger support for
higher tension ranges
 | | Built-in mounting holes permit fixed installation for online use |
|
| Model |
Range | Outer Roller | Roller Widths |
| TX2-50 |
10 - 50 g | 57 | 7 |
| TX2-120 |
20 - 120 g | 57 | 7,10,15,20,30 |
| TX2-200 |
20 - 200 g | 57 | 7,10,15,20,30 |
| TX2-400 |
20 - 400 g | 57 | 7,10,15,20,30 |
| TX2-1000 |
100 - 1000 g | 57 | 7,10,15,20,30,36,41,50 |
| TX2-2000 |
200 - 2000 g | 117 | 7,10,15,20,30,36,41,50 |
| TX2-5000 |
400 - 5000 g | 117 | 7,10,15,20,30,36,41,50 |
| TX2-10K |
2.5 - 10 kg | 117 | 7,10,15,20,30 |
| TX2-20K-L |
5 - 20 kg | 117 | 7,10,15,20 | | |
Calibration to customized material:
If process material differs significantly from the standard calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 15 ft. should be supplied. |
| |
|
Roller Guide
Available Rollers for Hand-Held Tension Meters |  |
| | Click image for more info | | ___________________________________________ |
|
DXR
Tape & Band Tension Meter |  |
| | Click image for more info | | ___________________________________________ |
|
RX2/BX2
Narrow Web/Tape Tension Meter |  |
| | Click image for more info
|
| Roller Widh |
Line Speed
 ...m/min |
Roller Material |
| 7 mm |
1000 | Nickel-plated steel |
| 10 mm |
1000 | Hardcoated aluminium |
| 15 mm |
1000 | Hardcoated aluminium |
| 20 mm |
1000 | Hardcoated aluminium |
| 30 mm |
1000 | Hardcoated aluminium |
| 36 mm |
1000 | Hardcoated aluminium |
| 41 mm |
1000 | Hardcoated aluminium |
| 50 mm |
1000 | Hardcoated aluminium |
Air Damping (A)
An adjustable, precision air dashpot provides steady
tension reading as tension fluctuate. |
 |
| |
Lever (L)
A heavy duty, lever-operated mechanism moves the outer rollers
for easy acquisition of the running filament. Recommended for models of
10 Kg or higher. |
 |
| |
Memory Pointer (M)
Designed to retain the peak value as tensions fluctuate.
Manually reset by using the knob located in the center of the dial. |
 |
| |
|
Note: Model TX2-50 is not available with memory pointer |
| | | | The TX2 Tension Meter is supplied as a complete kit including meter and instruction manual in a foam-fitted hard-plastic carrying case. |
 |
| Accuracy |
± 1% of full scale or
± 1 graduation mark on scale |
| Diameter of Scale |
41 mm |
| Maximum Speed |
1000 m/min |
| Roller Material |
Hardcoated aluminium |
| Housing Material |
Die-cast aluminum |
| Temperature range |
50 - 113°F (10 - 45°C) |
| Air humidity |
85 % RH, max. |
| Housing dimensions(L x W x H) |
7.5 x 3.3 x 1.8 in(188 x 85 x 45 mm) |
| Weight, net (gross) |
1.2 lbs (3 lbs) |
|
|
