View Larger Image
|
|
AP Dynamometer
Mechanical Dynamometer |
 The Dillon AP Mechanical Dynamometer exhibits limitless versatility as a tension, traction and weight measuring instrument.
Full selection of capacities--
Available in capacities from 500 to 100,000 pounds, 200 to 50,000 kilograms, 2,000 to 500,000 Newtons.
Long life--
The core of the device is a steel flexing beam. The enclosure is a heavy aluminum alloy case with baked on protective finish. The dial face is sealed and cushioned with a rubber gasket.
Safe for overhead applications--
Most models have a 5:1 ultimate safety factor.
Zero control--
Use it like a tare. It can cancel preset load values up to 20% of device capacity.
NIST Traceable - The EDxtreme comes with a NIST traceable calibration certificate. |
 Accuracy: ± 0.5% of full scale capactiy for precise data. | | Broadest range of capactities and resolutions are certain to fit your needs | | Wide temperature range for use in nearly any environment (-50 to 140°F / -45 to 60°C) | | Largest safety factor for overload protection and long life | | No batteries required | | Dial size choice for best in portability or visibility | | Anti-parallax dial and pointer produce accurate readings from any perspective |
| | Maximum hand retains peak load point and is easily reset | | High strength case resists heavy blows | | Generous shackle openings mate with most hooks an dhardware | | High specification materials on all load components. Heat treated to tight tolerances | | Offset load beam eases tension measurement | | NIST Traceable Certificate Included | | 2 Year Warranty |
|
 |
 |
| Model |
Capacity | Resolution | Dial Size |
| AP5-500LB (30006-0019) |
500 lbs | 5 | 5" (125 mm) |
| AP5-1000LB (30006-0027) |
1,000 lbs | 10 | 5" (125 mm) |
| AP5-2000LB (30006-0035) |
2,000 lbs | 20 | 5" (125 mm) |
| AP5-4000LB (30006-043) |
4,000 lbs | 25 | 5" (125 mm) |
| AP5-5000LB (30006-0050) |
5,000 lbs | 50 | 5" (125 mm) |
| AP5-8000LB (30006-0076) |
8,000 lbs | 50 | 5" (125 mm) |
| AP5-10000LB (30006-0084) |
10,000 lbs | 100 | 5" (125 mm) |
| AP5-15000LB (30006-0092) |
15,000 lbs | 100 | 5" (125 mm) |
| AP5-20000LB (30006-0100) |
20,000 lbs | 200 | 5" (125 mm) |
| AP10-1000LB (30007-0026) |
1,000 lbs | 5 | 10" (250 mm) |
| AP10-2000LB (30007-0034) |
2,000 lbs | 10 | 10" (250 mm) |
| AP10-5000LB (30007-0059) |
5,000 lbs | 20 | 10" (250 mm) |
| AP10-8000LB (30007-0075) |
8,000 lbs | 50 | 10" (250 mm) |
| AP10-10000LB (30007-0083) |
10,000 lbs | 50 | 10" (250 mm) |
| AP10-15000LB (30007-0091) |
15,000 lbs | 100 | 10" (250 mm) |
| AP10-20000LB (30007-0109) |
20,000 lbs |
| AP10-30000LB (30784-0017) |
30,000 lbs | 200 | 10" (250 mm) |
| AP10-50000LB (30784-0033) |
50,000 lbs | 200 | 10" (250 mm) |
| AP5-500KG (30006-0134) |
500 kg | 5 | 125 mm (5") |
| AP5-1000KG (30006-0159) |
1,000 kg | 10 | 125 mm (5") |
| AP5-2000KG (30006-0126) |
2,000 kg | 20 | 125 mm (5") |
| AP5-4000KG (30006-0167) |
4,000 kg | 25 | 125 mm (5") |
| AP5-5000KG (30006-0175) |
5,000 kg | 50 | 125 mm (5") |
| AP5-10000KG (30006-0118) |
10,000 kg | 100 | 125 mm (5") |
| AP10-500KG (30007-0133) |
500 kg | 2 | 250 mm (10") |
| AP10-1000KG (30007-0158) |
1,000 kg | 5 | 250 mm (10") |
| AP10-2000KG (30007-0125) |
2,000 kg | 10 | 250 mm (10") |
| AP10-5000KG (30007-0174) |
5,000 kg | 50 | 250 mm (10") |
| AP10-10000KG (30007-0117) |
10,000 kg | 50 | 250 mm (10") |
| AP10-20000KG (30784-0058) |
20,000 kg | 100 | 250 mm (10") | | |
Klaxon signal alarm
Mounted on rear of the Dynamometer and sounds an alarm at a preset load point. For capacities through 20,000 pound (10,000 kg) only
Zero positioning
The standard zero position is 9 o'clock for both the 5" and 10" dial sizes. Capacities up to 20,000 lb can be supplied with the zero at 12, 3 or 6. Photo shows a nonstandard position of 12 o'clock.
Oversized shackle and pin assembly. Available with all AP5 models and up to AP10-20000LB/AP10-10000KG models only.
Addition to standard shackle & pin (sold as an accessory at time of order or after sale)
Steel storage case For 10" (250 mm) diameter model AP10-20000LB/AP10-10000KG and lower
Hook Accessories
| Part # |
Hook Rating |
For Dynamometer Ratings |
| AP-H3 | 3-ton | 500-6,000 lb / 200-2,000 kg |
| AP-H5 | 5-ton | 8,000-10,000 lb / 4,000-5,000 kg |
| AP-H10 | 10-ton | 15,000-20,000 lb / 10,000 kg |
|
|
|
